Ways To Get Rid Of Sap From Wood Furniture
The sap is a sticky substance that acts as the lifeblood for trees. Sap consists of nutrition required by the far ends of leaves and branches. Once the tree is cut, the sap no longer flows rather it stays inside the wood that can ooze out due to changes in humidity and temperature. In order to remove sap from wood Furniture, the user needs to follow the below-given ways:
Remove Fresh Sap
The user can remove fresh sap from wood by following the below-given steps:
- Wipe Down With Paper Towel:
The first step will be to wipe down the fresh sap from the wood by using a paper towel. It has been recommended by the experts to remove oozing sap as soon as possible because thick sap is very hard to remove. - Scrape Off The Hardened Sap:
In case, the sap has hardened, the user needs to scrap it off by using a metal scraper. It is necessary to scrape off as much sap as possible during the step. - Clean With Oil Soap:
The user needs to remove residue from the wood by cleaning it with oil soap. First, the user needs to apply the oil soap over the residue and scrub the surface well by using a soft brush. After that, the user needs to rinse the surface area with warm water. - Use Acetone:
After cleaning the wood surface with oil soap, some sap residue will remain over the surface that can be wiped away with a damp rag containing Acetone.
Remove Already Hardened Sap
The sap that has already hardened over the wood surface can be removed by following the below-given steps:
- Allow The Sap To Harden:
There are several woodworkers suggesting that the hardened sap is easier to remove compared with fresh or soft sap. The user needs to allow the fresh sap to harden making sure it doesn't contain any tackiness. - Scrape Off The Sap With Chisel:
The next step will be to scrape off the hardened sap with a chisel. First, the user needs to hold the chisel over the wood surface in a position making sure the flat side of the chisel is against the wood. Then, the user needs to press the chisel over the sap until it loosens. - Use Acetone:
Once the sap is scraped off the wood, the user needs to wipe away the remaining sap by using a rag dampened with acetone.