How To Redo A Kitchen Table And Chairs: Best And Easy Way To Update & Makeover


Best And Easy Way To Redo/Makeover A Kitchen Table And Chairs

The best way to redo/makeover a kitchen table and chairs is mentioned as follows:
  1. Sand The Surface: The first step is to Sand The Surface, the user does not need to sand off the whole laminate or finish, the purpose of sanding is only to rough it up enough, so that the paint or any finish can adhere better to the surface. The user sanding also sands the spindles and legs as well.
  2. Prime The Table & Chair: After the sanding is done then clean the surface to remove all the sanding dust, vacuum or clean with the help of a cloth. After that, the user needs to apply the primer to the surface, the primer is an important part of the process as it helps the paint to adhere better while applying the primer the coat should be even, apply with the brush or spray the primer.
  3. Paint The Table & Chairs: Once the primer is completely dried than go for painting or finishing job. In order to have the seamless look apply two coats of the finish. However, the user should make sure that brushstrokes are even and remove any drips that may occur.
  4. Gloss Finish: Once the painting job is done and is dry then add the last layer of the polyurethane gloss finish but this step is completely optional. It's helpful in protecting the surface from the spills and chips. In order to avoid the unsightly brushstrokes, it’s best to use a brush specifically for polyurethane or varnish.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved