General Overview
The cordless blinds are very cheap & affordable to everyone and it is an easy way to control the light and privacy of your home. It is combined of cords going through the slats which help it to operate. You have to simply pulldown your blinds on the bottom rail and tilt it and rail back. Most of the blinds are made up of fabric, metal, plastic, wood, etc. Usually, cordless blinds are used in bedroom, bathroom, and on large windows and the lifespan of the cordless blinds is near about 5-8 years if cared properly. You can fix your cordless blinds at your home without the help of manufacturers and you don't need to install a new one. An internal motor spring that will react hold your blind in place and sometimes you have to reset your motor for the blinds to work correctly.
5 Easy Steps To Fix/Repair Cordless Blinds
In inclusion, the internal ribbons strung through with your blinds may become tangled but don't worry it can be easily fixed again. If you want to fix your cordless blinds then you need to read and follow all the given steps. Here are the steps for this process:
- Pull Cordless Blinds: First of all, you need to pull your cordless blinds all the way out, extending your cordless blinds fully because this process will help you to straighten out any constitutional ribbon segment that is tangled inside. Pull your cordless blinds down from the middle part of your blinds(not the other sides)because it may only tangle the ribbons more.
- Pull Cordless Blinds & Bottom Rail: Now you need to smoothly pull your cordless blinds, bottom rail from the intermediate to revive the spring at the top to have your blinds recoiled.
- Unhook: Next you need to unhook your blinds from its mounting clips on the window if you are still facing issues with sagging or no recoil on your blinds.
- Remove The End Caps: After that, you need to remove the end caps from your headrail and then look inside at the motor spring. There are numerous friction clips that help your cordless blind recoil. Also, look for any type of damage to the friction clips and if indispensable then you need to contact your manufacturer for replacement of friction clips.
- Remove Friction Clips: This is your final step, remove one of your friction clips inside if they have any type of damage. The problem may be due to the fact that it has too much friction, causing your cordless blinds to operate in a very rough manner. Repeat the removing friction clips step, one at a time until your cordless blind operates smoothly.