General Overview
To build the beautiful wall cabinet it is mandatory to take the precise dimensions. The basic wall cabinets comprise of various things like storage area compartments, doors, etc. Careful designing is a must before initiating the project. Building wall cabinets of your own do not only show one's creativity but also help in saving the lots of expense. Any type of cabinets like bathroom, kitchen, or garage is built up with the same procedure.
Steps For Making The Recessed Wall Cabinet
Easy steps required to build the recessed wall cabinets are mentioned below:
1.
Basic Box: The first thing is to build the basic box using plywood by securing it with screws.
2.
Pin Holes: Shelf Pin holes need to be drilled on both sides of the box for the adjustable shelves.
3.
Create Back: Built the back using less expensive plywood sheet and screw it.
4.
Mirror: Cut the mirror according to the proper dimensions of the box and keep it aside.
5.
Aluminum: Cut the oversized aluminum pieces to embellish the sides of the wall cabinet with the same.
6.
Aluminum Frame: Once the aluminum is cut fix these pieces on all sides of the cabinet frame using adhesive and allow it to dry.
7.
Screw The Frame: Screw all pieces of the frame together to build the proper frame structure.
8.
Sanding: Sand all the frame pieces in order to make them even and smooth.
9.
Buffing: Once the sanding is done buff the surface for more luster and better staining.
10.
Attach Mirror: Attach mirror in the middle of the wall cabinet box by using epoxy in all corners.
11.
Wall Opening: Analyze the size of the wall opening and adjust it using the drywall patch.
12.
Attach Cabinet: Attach cabinet into the wall and follow it by securing using screws.
13.
Adjustable Shelves: Fix the adjustable glass shelves inside the cabinet and its done.
Simple Steps To Build The Wall Cabinets For Kitchen, Bathroom And Garage
The steps to build the wall cabinets for kitchen, bathroom, or the garage are same which are mentioned below:
1.
Design Cabinet: Design the basic overview of the wall cabinet that includes rails, shelves, top, and bottom cleats, etc.
2.
CrossCut Jig: The next step it to designs the basic of the circular cross-cutting jig.
3.
Create Cross Cut Jig: Start the cabinet making by following the simple ross cutting simple crosscutting jig.
4.
Layout: Once the crosscut jig is done follow up by making the proper layout to make all sides according to the accurate dimensions and to cut all the pieces like sides, top, and bottom.
5.
Cut Shelves: Crosscut the shelves using the jig and adjust them in pairs.
6.
Gauge: Adjust and gauge the thickness of the plywood according to the requirement.
7.
Rabbets: Design the placement for top and bottom rabbets to proceed.
8.
Fence Line: Take the measurements to create the fence line and draw the layout for the same.
9.
Rabbet Cuts: Cutting of the rabbets must be done using the router in left to right directions.
10.
Pin Holes: The shelf holes need to be drilled first six and then remaining.
11.
Rabbet Detail: Design the rabbet details like dimensions, top and bottom.
12.
Back Rabbets: Rabbetting the sides for the back portion needs to be done.
13.
Side Set Up: Set the sides in order to assemble the cabinets.
14.
Installation: The installation of the back and cleats needs to be done.
15.
Create The Box: Create the box and installation of the slite needs to be done.
16.
Rails: Cutt and install the rails to proceed and follow it by securing with nails in order to fill the nail holes.
17.
Locate Place: Locate the place to mount the cabinets. To find the studs use a stud finder.
18.
Leveling Sheet: To fix the wall cabinet installation of the temporary leveling sheet is recommended.
19.
Predrill And Fix The Cabinet: The cabinets need to be pre-drilled in order to mount them on the wall and securing them by screwing. Once the cabinet is mounted remove the temporary leveling sheet.