How To Stain Teak Furniture: 3 Parts And Steps To Stain

3 Parts And Steps To Stain Teak Furniture

Teak is a large deciduous tree that grows in tropical forests. It’s often used for outdoor furniture since it’s more resistant to the elements than other types of wood. When untreated, it tends to fade to grayish color, so it is often stained. Before being able to stain teak furniture, you’ll need to sand and smooth the wood first.

Part 1: Sanding The Teak

1. Paper towel: The first step is to wipe the dirt, dust, and debris off from your teak furniture. You can also use a cloth or a dry paper towel to brush any dirt off. If there are more cohesive spots to clean off then you can also use a wet rag to rub your teak furniture for more cleaning. Always remember that don’t use any cleaning products. You efficacy damage the wood, but you’ll unequivocally make your staining action more difficult.
2. Sandpaper: Next, you need to sand the rough spots with the help of sandpaper(120 grit). Now, run your hand over your teak furniture to find any rough spots in the wood. If rough spots need to be sanded down to match the rest of the surface of your furniture then use this sandpaper to do so. While sanding, check repeatedly to make sure the rough spot is even with the rest of the wood.
3. Sand Again: Finally, use sandpaper(220 grit) on the whole surface of your teak furniture. Before the staining process, be sure the surface is even & prepared to consume the wood stain. Sand the comprehensiveness of the surface until it becomes even & smooth to the touch.
   → Sand along the with the direction of the grain or you risk rasping the wood.
→ Wipe any wood dust off with the help of a dry rag before proceeding.

Part 2: Smoothing The Surface

1. Foam Brush: After following the previous part, now you need to paint a layer of the sanding sealer. To do this process with the help of a foam brush to cover the wood of your furniture in the sealer. This will make the surface of your teak furniture smoother and will give the wood stain a better grip. If you want a lighter color, you can dilute the sealer with mineral spirits
2. Wipe Off: Next, wipe off any excess sealer after a few minutes. Once the sanding sealer has started to dry now, use a clean cloth to wipe off any sanding sealer that’s still amalgamate atop the wood. This will avert blotches & spots from forming on the wood. This will also keep the surface smooth.
3. Dry: Now, let the sanding sealer dry completely. It should only take a few hours for the sanding sealer to dry completely.
4. Sandpaper: Pass over your teak wooden furniture with sandpaper (220 grit). You should start to sand the surface a few times before proceeding. This will also smooth out any spots where the sanding sealer might not have dried evenly. Use a rag to wipe off any residue which comes after your sanding process.

Part 3: Staining The Teak

1. Foam Or Bristle Brush: Now, you have to paint on a layer of stain. You can also use a diversity of tools to do this. A foam brush or a bristle brush will also do this work fine, but you can also use a cloth that is dipped in stain to color your teak wooden furniture. Apply an even coat all over your teak furniture. If there are any parts of your furniture which you don’t want to stain then you can use masking tape to protect them.
2. Wipe Off: Now, wipe off any stain not absorbed by the wood of your teak furniture. Use a clean dry rag to wipe off any excess stain. Use a dirty rag for this process, the wood stain would be incredibly difficult to wash out.
3. Wipe Off: Now, wipe off any stain not absorbed by the wood of your teak furniture. Use a clean dry rag to wipe off any excess stain. Use a dirty rag for this process, the wood stain would be incredibly difficult to wash out. The longer you leave on the stain before wiping, the darker the color.
4. Dry: Let the wood stain dry for a few hours. The amount of time it takes for the stain to wholly dry will depend on how thick a layer you used on the surface. Prevent touching the stain too much if it’s still wet; you might end up with an uneven, blotchy coat.
5. Add: Add another layer of stain for a darker color. After the first coat has dried, take a moment to see if you’re satisfied with the color. If you want your furniture to be darker, you can add another coat of wood stain, right on top of the previous layer, following the same process.
6. Brush Paint: Apply a finish to the surface. Use a clean brush to paint on the finish once you’ve got the desired color. After applying the finish, make sure to give it plenty of time to dry. There are three main types of finish, each with their own characteristics.