General Overview
The wooden table needs to be restored when it seems to lose grace and charm due to prolonged usage. The wooden furniture restoration is not that much tough and just need to follow the few logical steps. The wood restoration adds the new life to it and helps in eliminating all types of tough stains like coffee, tea, etc. Restoring the wooden table also helps in treating the visible scratches and gouges. The restoring is the only way to get rid of the peeling varnish as well.
Easy Steps To Refinish The Outdoor Wooden Table
Easy steps to refinish the wooden table are mentioned below:
1.
Well Ventilated Area: The first step ensures that the work area is well ventilated.
2.
Lay Cloth: Lay a piece of the cloth over the ground and place the table over it.
3.
Stripper: The paint stripper needs to be applied over the table using a paintbrush. Allow the stripper to sit over the table for ten to fifteen minutes.
4.
Plastic Scrapper: The old finish needs to be removed with the help of the plastic scraper. Using metal scrapper is not recommended as the metal can react with the chemicals. If the finish is not properly removed try applying a bit more stripper to it.
5.
Sanding: The sanding of the table surface must be followed in the direction of the grain. The sanding must be done smoothly to make the surface even.
6.
Grain Filler: To make the grain more shiny and attractive treat it with the grain filler. The filler must be applied using the paintbrush and exactly as per the directions labeled on the product.
7.
Apply Sand Sealer: Apply the sand sealer in liberal amounts to the entire table and allow it to soak for a couple of minutes. The excess sealer must be removed using the clean rag. Allow it to dry completely.
8.
Sanding: Sand the entire table using 220 grit sandpaper.
9.
Refinishing: The two coats of the stain is required to be coated over the table. The sanding using the light grade sandpaper must be done between the coats as it is necessary.
10.
Final Finish: Once the stain dries completely apply the final finish coat using polyurethane, Tung oil or wax to get the completed new and refinished table look.
Restoring Wooden Table Without Sanding
Steps to restore the wooden table without sanding are as follows:
1.
Remove Old Finish: The old finish from the table needs to be removed entirely. If it is of wax then apply the wax wash remover to eliminate it.
2.
Scratch Touch Up: Check for the scratches and treat them using the Mohawk Ultra Touch-Up Marker.
3.
Gouges Treatment: If the table is affected by the gouges if any then fill them using the Mohawk Quick fill burn-in a stick.
4.
Plastic Leveling Tool: The tool is required to remove the excess filler from the table.
5.
Wax Wash Remover: Clean the table once again using the wax wash remover prior to staining.
6.
Staining: Apply the wood stain to the entire table to get the restoration done perfectly.
Restoring Coffee Table With Paint
The steps to paint the coffee wood table are mentioned below:
1.
Cleaning: First important thing is to clean the table properly in order to remove dirt and grime.
2.
Loose Paint: Use a scraper to remove the loose paint from the table gently to avoid damage.
3.
Sanding: Use a palm sander to make the surface even. Initially, sanding must be done with the 80- to 100-grit sandpaper is recommended. Once done re-sand the table using 150- to 200-grit.
4.
Crevices: The table Crevices must be hand sanded.
5.
Tack Cloth: Use a tack cloth to remove all sanding residue.
6.
Primer: The application of the spray primer is recommended to get the best results and sand again smoothly once the primer dries.
7.
Painting: The paint must be applied using a nylon bristle brush and let it dry. Apply the second coat and allow it to dry as well.
8.
Clear Coat: Coat the polyurethane clear coat on the surface to give it a clear finish.
9.
Dry It: Let the table dry completely for future use.