How To Remove Sticker Residue From Wood: Different Ways & Methods To Get Rid Of Sticker Residue

Different Ways & Methods To Get Rid Of Sticker Residue From Wood

Here are some of the simplest ways & Methods by which the users can easily remove the sticker residue from the wood:

By Applying The Heat

1. Use The Heat Gun: One of the simplest ways is to use the Heat gun and keep it on a low setting mode and then apply the continuous heat to the entire sticker area on the wood item for almost 30 seconds. The users are advised not to use the heat gun for a longer period of time as it can easily destroy the finish of the wood item.
2. Lift The Sticker Residue: Once the heat is applied then the users need to use a scraper or a putty knife and then gently scrape off one edge of the sticker residue in order to pull it. Once the users are successful in pulling the one edge of the sticker residue then they need to grasp that one edge with the help of the tweezers. Then again use the heat gun and apply the heat to that lifted edge in order to remove the remaining sticker residue respectively.

Using The Solvents

1. Use The White Vinegar: Pour a good amount of the white vinegar in a bowl and soak a soft cloth in it. Then lift the soaked cloth and place it over the sticker residue on the wood item for almost five to ten minutes. Then the users need to pull the sticker residue by using the tweezers or the fingernail respectively.
2. Using The Glue Remover: If in case the white vinegar method was not that successful in removing the sticker residue then the users can use adhesive cleaner. Pour a good amount of the adhesive cleaner directly over the sticker area and let it be there for few minutes so that the affected area will easily soak the cleaner. Then use the dampened cloth and wipe away all the excess adhesive cleaner and then use the scraper and peel off all the sticker residue from the wood item.
3. Using The Petroleum Jelly: This is a very hectic process as it can take up almost 8 hours. The users have to apply the petroleum jelly directly over the sticker residue and wait till the residue softens. Once the users find out that the residue softens residue from the wood surface accordingly.
4. Using The All-purpose Oil: Another way to get rid of sticker residue is to use the vegetable or the baby oil. Just pour few drops of the oil to the affected area and let it be there for almost 2 hours and then gently scrape off the residue with the scraper and then wipe away the wood surface with the paper cloth.
5. Using The Solvents: The chemicals like lighter fluid, paint thinner, rubbing alcohol and acetone can easily eliminate the sticker residue from the wood surface but using these chemicals can result in the destruction of the wood finish.

Using The Oil Based Material

1. Select The Material: The users are advised to choose the material that should be oil-based probably like the lemon oil as using this item won't harm any of the wood finishes.
2. Use The Tape: Then cover the affected area with the transparent tape commonly termed as the magic tape and then forcefully pull the tape. The users are advised not to use the duct tape as it will leave more sticky residue on the wood item.
3. Clean The Area: Then make a solution of the liquid soap and the warm water in a bowl and then dip a soft scrub in this solution. Clean up the affected area with the soaked scrub in order to clean up the remaining sticky residue.
4. Use The Sandpaper: On cleaning the affected area if the users still find out some more sticky residue on the wood item then they need to use the medium grit sandpaper and rub it gently over the affected area without damaging the wood finish. Once the sanding process is completed the users can re-apply the wood finish to the item respectively.