The honeycomb shades are commonly known as the cellular shades and are affixed similar to the Venetian blinds. The angle brackets that are found at shade top edges especially to hold this up in one place. The users can found more than one angle brackets in between the shades and that will simply depend upon the width of the honeycomb blinds. The users are advised to evaluate their shade type that they are going to replace with the honeycomb shades before completely detaching it. The users can also somehow use the pre-existing affixing materials while affixing the new ones.
Easy Procedure And Items Required To Remove Honeycomb Blinds
The users can easily remove the honeycomb blinds at home by gathering the below-mentioned materials and then following the below-described procedure:
Materials Required
- Work Gloves
- Flat-Blade Screwdriver
- Phillips-Head Screwdriver
- Needle-Nose Pliers
- Wood Filler Paste
- Small Putty Knife
Procedure
- Wear The Hand Gloves: Before moving towards the procedure the users are advised to wear up the hand gloves so as to protect their hands from getting hurt while removing the angle brackets.
- Disconnect The Base: Start by disconnecting the base of the blinds from the brackets that are holding it by simply crooking them apart from the base of the blinds by using the flat screwdriver so as to free up the brackets if in case they are inflexible.
- Raise The Blinds: After that you need to raise up the blinds till it stretches near about four inches down and this step will help in keeping the shade bulk from the brackets and then the users will get easy access to the assembly of the base and top surface of the angle brackets.
- Use The Screwdriver: Then the users need to enter the screwdriver in between the base tab of the bracket and the topmost shade rail and then break it accordingly. By doing this the users will easily liberate the rails.
- Repeat The Same Process: The users are advised to follow up the same process while they are detaching the other angle brackets but they need to left apart from the central bracket in its own place. If in case the users find out that there is no support for the brackets then they need to ask the help from the other person to hold up the side rail so as to stop it from dropping down.
- Bend The Rail: The users then need to bend down the rail back towards them as by doing this the users can easily free down the rail front from the shade bracket and the shade rail will now be free from the bracket ends.
- Lift The Rail: Then they need to lift the rail upwards so as to make it free from the central bracket support of the shade.
- Use The Wood Putty And Putty Knife: Once the users detached the blinds and the brackets then they are advised to fill up the holes of the screws by using the wood putty material and then pressing it inwards and making the surface smooth by using the putty knife respectively.