Best And Easy Steps For Making Box Spring Out Of Plywood
The plywood is regarded as the cheapest form of the board than any other woods. The plywood is very famous for the lite weight which means that It's very easy to move plywood from one place to another. Basically, if the user is looking for the wooden platform bed but in a low budget then plywood might be the right choice for them. The user can make the box Spring Out Of Plywood by following the below-mentioned steps;
- Purchase The Gears: The first step is to buy some gears from the hardware store that is needed to build the box spring out of plywood. The gears that will be needed are screws, plywood and bed rail hangers.
- Mount The Hangers: For building any form of the wooden bed Bed rail hangers are very essential. The hangers will usually help to form a strong connection between all the bed rails in the frame. The user needs to Place the hangers carefully on the edge of the side rails and to the attaching point of the head post. One of the important things to consider here is that the formation of box spring totally depends on the hangers. The user should check and recheck the placement of the hangers to ensure that they are rightly placed. If the user is unable to find the bed rail hangers that the alternative is to buy 8 long lag bolts. The Lag bolts are widely available and can make the bed pretty solid.
- Support Rails: Once the bed rail hangers are mounted the next step is to attach support rails. Fix the supporting rails using the wood screws. In order to provide the maximum weight support then keep the distance between the screws to be around 12 inches.
- Supporting Blocks: For the supporting blocks the user needs to first measure the width of the supporting beam. The U groove should be width enough as it holds the supporting beam. The user needs to make 5 holes in the Supporting block these holes are for screws which are going to attach them with foot rail and head post of the bed. Once all the blocks are ready, the user can attach them with screws with the foot rail and head post.
- Support Beams:After the support blocks are done then connect all of the hangers to bed rails altogether. Now the frame is ready the user will need to get the support beams and place them between two support blocks securely. It is advisable to have the beam of the strong wood because the stronger beam will cause the bed to last for a long time.
- Plywood Particles: Cut out a large plywood sheet, according to the inner measurement of the bed frame, now place the cut plywood sheet inside the frame the bed is almost ready. Place the mattress on the bed