How to Install Vinyl Tile on Concrete Floor?
Here are some of the steps by which the customers can easily Install Vinyl Tile on Concrete Floor:
- Place The Plastic Cover: The customers need to start by placing a plastic cover all over the edges and the sides of the concrete floor. The customers then need to use the adhesive tape in order to secure the plastic covering. They need to follow this step in order to check the moisture content on the floor.
- Clean The Floor: The customers then need to clean all the dust and the debris particles from the concrete floor by using the wet vacuum or by simply using the broom. The customers then need to let the concrete floor dry completely for near about 24 hours.
- Apply The Paint: The customers then need to apply the primer paint all over the surface of the concrete floor by using the paint roller and they also need to detach all the baseboard molding by using the screwdriver accordingly.
- Find The Centre Point: The customers then need to find the center point of the concrete floor by drawing the lines from each corner of the wall to the middle of the concrete floor and one common point where all the lines will bisect each other is the center point of the concrete floor.
- Place The Vinyl Tiles: The customers then need to lay the vinyl tiles on the concrete floor and they have to start placing the tiles from the center point. The customers then have to remove the back covering of the vinyl tile and then affix the tiles to the concrete floor accordingly.
- Re-attach The Molding: The customers then need to trim the vinyl tiles in order to get fitted opposite to wall by simply using the flooring knife. The customers finally need to re-attach all the molding to the baseboard by using the nails and the hammer.