Easy Methods Of Installing Blackout Shades Behind Blinds
If you are looking to add some style to your room, especially, living room, then installing the blackout curtains over blinds is one of the best ways to accomplish this task. There are numerous methods when it comes to installing blackout shades behind blinds, from simple tension rod to more austere style, cover the cornice using curtains hanging from an installed rod.
Use The Tension Rod
Start by using the tension rod so as to put up the curtains in between the blinds and the cornice. The cornice is the decorated padding type that is simply used to alter the blind top and they are made up of the plastic or they are covered up with the fabric. If you look in between the blinds and the cornice, you will find out that there is a space to adjourn the rod in between the two cornice sides. You can easily hang up the curtains from that rod and then put in them within a few minutes.
Use The Velcro
Velcro is another option when it comes to affixing the stationary curtains. You simply need to wipe away the cornice inner that covers up the vertical blinds so as to detach the grime and the dust particles. Then, affix the Velcro side with the cornice and then the other side with the curtain's exterior top. You are advised to take up the time in order to make sure that the Velcro strips are in the exact position. Once you are done with this process, you need to affix the curtains with the cornice respectively.
Install The Brackets
You can also install the brackets at the cornice so as to hang up the curtains on the front side of the vertical blinds. You need to purchase the affixing bracket set and the curtain rod as well. Then, position the bracket near to the cornice end and re-adjust the setting in order to make sure that they will gently hold to the cornice. You can also make the curtains to hang within the rod and then position the rod within the bracket so as to complete their process.
Detach The Cornice
You can detach the cornice and then install the rod for the complete setup. You need to use the screwdriver so as to detach the hardware of the cornice within the surface of the wall. Then, calculate for the rod and then drill within the wall at the suitable spots. Then, put the curtains within the rod before letting them hang within the brackets respectively.
Decide The Hanging Method
Decide the hanging method before you calculate the measurements of the curtains. The hanging method will determine the width of the curtains like in case if you are using the tension rod then the curtains will spread from one to another window end. But in case you are using the curtain rod, you can also make the curtains wider instead of the window.
Determine The Width, Length & Distance
- Width: Calculate the depth of the area where you are looking to hang down the curtains or want to cover that area with curtains. You need to use the measuring tape, pen, and paper piece. Then, spread out the tape from one window end to the other end and then note down the calculations over the paper piece and then label it as the width accordingly.
- Length: You need to extend the tape from the blind top to the base of the window and this measurement will provide you with the curtain length. If in case you cannot reach the window top then you need to use the step-stool and then note down the measurements over the paper piece and term it as the length respectively.
- Distance: Calculate the distance within the surface of the floor to the blind top and this calculation is very important to purchase the curtains.
Purchase The Cushions
Finally, you need to purchase the curtains longer then your taken calculations as you can then fit up the large-sized cushions as per your needs.