Easy Steps For Getting A Smooth Finish With Chalk Paint
If the user is unable to find the best way to get the smooth finish with the chalk paint then below is the method given to get the smooth finish through easy steps:
- Cleaning: First step before heading towards the process is to go for cleaning the area where the chalk paint is to be used, use a paper towel or sponge to clean any grime or residue.
- Wood Filler: This step is important in case there is any deep scratch or veneer is missing that time apply the wood filler and leave it to dry completely. After the wood filler is dry then sand the area and repeat the process if needed.
- Mix Paint: Now mix the chalk paint well and if needed add some water, stir well.
- Apply: In order to achieve the smooth finish use the short-handed brush which has the slanted bristles. Start applying the paint in the back and forth direction but the final stroke should be in the same direction.
- Second Coat: Once the first coat is done and dried then go for the second coat but make sure that the second coat should be in opposite direction to the first coat. While applying the second coat its also very important to make sure that the paint is not too thick, in case its thick then apply some water and stir.
- Sanding: Once the paint job is done than wait for it to dry then use a 400 grit sandpaper. For the sanding process roll the sandpaper around the sanding block and start sanding in the circular motion. While sanding it will create some marks, but keep on sanding until the marks are disappeared.
- Waxing: After the sanding is done apply the wax with the old T-shirt or cloth. Apply the wax in the circular motion and leave it overnight.
- Buff Finish: In this step the user needs to take a cloth and start buffing in a circular motion. This process will give the area super smooth finish.
- Sand Again: In case the user wants more smooth finish then after the buffing process take high grit sandpaper like 600 or very fine sanding sponge and start sanding in a circular motion while sanding clean the excess debris.
Tips
Th users can use the below mentioned tips to get extra smooth finish:
- Different Brush Strokes: Use the Different Brush Strokes for getting different types of the results. The user can go for the Cross-hatch to get the faux linen effect for brushing an area vertically and then horizontal strokes.
- Stipple Look: To get the low peak valley look pour the thickly paint on an area and dab with the bristles.
- Distress Carefully: Its very important to distress carefully with the fine sandpaper.
- slick surface: In case of the slick surface try to apply thin coats of the chalk paint.
- Greater Depth: In order to get the Greater Depth its important to Create a Two-Color Distress.
- Supple Texture: For the supple texture use the wax and apply it with the help of lint free cotton or with a brush.
- Sanding: For the extra smooth finish use the sanding process.