Step By Step Guide To Fix Broken String On Honeycomb Blinds
The honeycomb blinds, also known as the cellular blinds, are ideal to get used in the home areas specifically when the users are having pet animals or small children. These kinds of blinds are very durable in nature and can be maintained easily. The honeycomb blind offers a fresh and purified look and these are mainly used to block up the natural light while offering better insulation to the rooms. The cellular blinds are having the gap and the cell in between them and the users can easily fix up the broken string on honeycomb blinds at home by gathering the below-mentioned steps:
- Detach The Shades: Start by detaching the honeycomb shades within the frame of the window and then lay it over the flat, clean surface. Then find out the edge caps at the base rail of honeycomb blinds and then detach it respectively. Then the users need to detach one edge caps within the topmost rail.
- Lift The Lock: Then lift up the string lock rigidly within the headrail so as to detach it. The string lock is usually square-shaped and is situated over the top or at the headrail base.
- Drift The Base And Top Rail: Then drift the base and top rail to the edge so as to reveal the cords of the honeycomb blinds.
- Determine The Suitable String: Find out the suitable string length that is to be in use. Then use the formula so as to find out the string amount that the users require. Then calculate the window height and then multiply it twice and then measure the shade width and add twelve inches with it and then add both the results with each other.
- Detach The String: Then detach the string and then use the lacing needle so as to embed it within the fresh & new string. Then position the washers within the pre-existing strings to the new string corners so as to protect it.
- Place The Rails: Then the users need to position the base and the top rail to the surface of the honeycomb blinds. Then thurst the string within the string lock and then embed the string lock back to its original place.
- Re-insert The Caps: Finally the users need to re-embed the base edge caps and the topmost edge cap. Then position the honeycomb shades back to its actual place accordingly.