How To Build A Dining Room Bench Seat: 5 Easy Steps For Making Dining Room Bench Seat

5 Easy Steps For Making The Dining Room Bench Seat

The dining room is a place where all the family members or friends take their meals together. In other words, its a place where all the family members gather together after a long day's work. In order to make your dining room look beautiful, you must place bench seats around your dining table. To build bench seat is not a difficult task to perform, simply follow easy steps mentioned below carefully:

Cut Board To Size: The first step is to cut down the board according to the needed size. The seats should be made from a 2 x 12 board that is strong enough to hold the weight and cut to the desired length. The user needs to choose a straight board, it is important to pay attention to the knots. If the user wants a cleaner and very less rustic look, then choose a board that has fewer knots or select a different kind of wood. When the user is ready to cut, trim down the end of the board first, this will help the user to measure from a well square edge. Cut the board to the same length as the table as this will help to maximize seating space, or the user can cut it 6 inches shorter if the user wants to slide the bench under the table.
Sand The Board: Once the above step is done then use a sander to smooth out all rough spots. Start with 120 grit and then follow with the 320-grit sandpaper, continue the sanding process until it is nice and smooth. It is advisable to use the sander having no cords or compressors because it is small, light in weight, as well as powerful.
Cleaning: After the sanding is done, then there might be sand dust or dirt, which needs to be cleaned before heading to the next step. Take a cloth and wipe down all the dust from the surface. If it is not cleaned properly then it can interfere with the finish.
Apply The Finish: At this point, the user can apply the stain or paint the color of the choice. The stain will look better, apply three coats of this stain in the desired color. The user should give proper drying time between the coats.
Attach Hairpin Legs: Once the board is completely dry then get to the last step of the project. In which the user needs to attach the legs, the hairpin legs are beautiful that can be easily attached with the help of a drill and the wooden screws, that are included with the legs. The hairpin legs are very much sturdy. Also, use the floor protectors on the legs.