Methods To Clear The Paper Backing From Vinyl Flooring
If the customer wishes to replace the vinyl flooring, then they need to face the difficult task of removing not only the floor backing but also the adhesive. There are some of the methods mentioned below that can be used for this job:
Method 1
- Cut: Begin the process by cutting the vinyl flooring in the strips with the help of the utility knife. It is best to pull up the strips one at a time. In order to lose the large gobs of the glue use the scraper and chisel.
- Heat Gun: For the difficult areas apply the heat gun because the heat softens the adhesive and makes it very easy to remove.
- Plywood: Use the scraper and chisel to loosen the adhesive on plywood underlayment. Try to remove the old adhesive as thoroughly as possible.
- Hardwood Floor: The user needs to work more carefully in case of the hardwood floor. Use the scraper only to remove the large chunks of the adhesive. For the rest of glue use the orbit sander. At last Strip the remaining glue with the help of the floor stripper and refinish the wood.
Method 2
- Chisel And Scrape: The user needs to Chisel and scrape adhesive as much as possible. For the tough adhesive use the methylene chloride. But before using this make the area well ventilated by Opening windows and turn on a fan because this chemical emits hazardous fumes.
- Mineral Spirits: The next step is to apply the mineral spirits and leave it for 10 to 15 minutes and then wipe the floor.
- Dry Ice: The users can also use the dry ice to remove the vinyl tile, simply lay the dry ice on the floor then scrape backing.