Steps And Items Needed To Attach Mirror On Dresser
The dresser mirror gives depth to your room & also convenience to the dressing area. You can easily buy all the dresser, mirror set supports and brackets separately. If you want to put or we can say attach a mirror on your dresser then you need to collect all the given items and follow all the given steps:
Items You Will Need
- Tape Measure & Pencil
- Steel Mirror Supports
- Screwdriver & Wood Screws
- Mounting Brackets
- Machine Screws
Steps
After collecting all the above-mentioned items, now follow the given steps below:
- First of all, you need to place your mirror face down on your bed or another surface which will not damage or scratch your mirror and then measure & mark the desired location of your mirror supports at the mirror frame, 3-4 inches in from the right & left sides.
- Next, you need to lift your mirror to an upright position and then wait for the mirror supports to stop swinging completely as level themselves. Now you have to center a bracket over each support at the bottom of your mirror frame & attach all the brackets to your mirror frame by using 2 wood screws for each of the brackets.
- Now you need to remove all the drawers from your dresser and look inside your empty drawer space and then locate the blind rail, that is vertically piece of your wood that reinforces the back of your dresser. Measure the back length(horizontal) of your dresser and then mark your center point at the top & at your blind rail.
- After following all the previous steps betwixt your mirror supports and then mark half of that distance to the right & left to each center point mark. Center all the brackets over your marks & screw the brackets to your dresser.
- This is your final step, simply loosen all the machine screw at the center of each bracket on the back of your dresser. Now you have to slide all the 2 mirror supports through all the brackets until your mirror reaches the desired height. Tighten all the machine screws & be sure that all the other screws are tight fully as well.