8 Simple Steps For Painting Over Glossy Wood
In order to paint over glossy wood, the users need to follow the steps mentioned below. Follow the steps carefully one by one to achieve the desired result of painting over glossy wood. In case you miss any of the steps mentioned below, you won't be able to perform this task accurately.
- Cleaning: To begin the paint job, the first step is to clean the area by wiping down the area with the help of the household cleaner. Simply apply the cleaner on the area and then wipe in the circular motion using a clean soft rag. In the case of strong stubborn or residue, that time spray the cleaner on the affected area and wipe with the scouring pad.
- Cracks: After cleaning, the user needs to look for the cracks and fill with the help of the wood putty. To use the putty, put some quantity on the putty knife and then spread it on the affected area with some pressure, let the putty to dry completely before heading to the next step.
- Sanding: Now sand the area, with the help of the fine-grit sandpaper that should range from the 120 to 220 grit, for the small or difficult spots, sand with the help of hand or use the sander for effortless sanding.
- Wipe The Area: Once the sanding is done next the user needs to wipe down the area to clean all the dust of sanding before paint job it's important that the area should be clean.
- Paint Roller: In case of the larger areas use the paint roller that will cover all the surface area, use a small or medium-sized roller, in case of the intricate areas use the smaller brush.
- Primer: Now apply the thin coat of the water-based primer this will help the paint to adhere strongly, apply the primer in the even coats. Here the user needs to make sure that all the area is covered. Wait for the primer to dry completely, drying time may vary for different primers, in order to check whether the primer is completely dry touch with finger to make sure it's not tacky.
- Paint: Now it is time to apply the even coat of the paint. Simply pour some paint in the paint tray then dip the roller or paintbrush and start applying in the solid and wide strokes. Apply the second coat once the first coat is completely dried. Try to cover all the area so that none of the primer spots is shown through.
- Durable Finish: For the shiny and durable finish add a coat of the water-based varnish.