6 Easy Steps And Items Needed To Make And Install Bed Slats
The lifespan of a wooden bed is nearly about 20-25 years if taken care of properly but the slats of a wooden bed may get damaged because of some reason but don't worry you can easily make the bed slats. Here are the item list and 6 easy steps to make and install bed slat by yourself, just collect all the items and follow all the 6 steps:
Items Needed
- Southern yellow pine wood & Tape measure
- Pencil & Straight square edge
- Bench saw or circular saw & Safety gear
- Belt clamps & Sandpaper or sanding machine
- Varnish or wax & Wood screws or rubber stoppers
6 Easy Steps
- Deciding The Size & Number Of Slats: The bed slats help to support your mattress on your bed. While some bed frames come with bed slats but others don’t come with flats. So you can make your own flatbed slats with by using the right wood, a few mentioned tools, and next given steps. Most beds are around 80-inches long & most slats are 2-by-1 inches. Hence, in this example, you would segregate 80 inches by 2 inches, which equals to 40 inches, which means that there is enough space for 40 slats.
- Purchasing Wood: Once you need to calculate that how many bed slats you will need & then purchase the calculate how many slats you will need, and then purchase the disburse amount of wood. You can but the yellow southern pine because this is one of the sturdiest choices, there are other woods you can build slats from.
- Measuring And Cutting: Next, measure the width of your bed & subtract approx. 1/2 inch because this width will be the appraisal you should cut your wooden slats to. Mark the square edge and cut it at 90 degrees across your selected wood. Then you need to use a circular saw or bench saw to make a clean & neat cut where you marked before. Use your first slat as a template for the rest of your wooden bed slats, by using it to mark the dimensions on the uncut wood. Cut all your slats you will need.
- Sanding: Once you have cut your wooden slats then you will need to sand them with the help of high-grit sandpaper or by a sanding machine. Smooth the wooden slats and get rid of any splinters.
- Varnishing And Waxing: You need to buy a beeswax & you can buy this product from Amazon, but you can also varnish your wooden slats but remember both are equally auspicious.
- Installing The Slats: Once you’ve finished making your wooden slats for your bed, now you need to place the first slat on the bottom of your bed frame. Now, place 3 more next to the original slat. Once done, you now need to use wood screws or rubber stoppers to secure all the 2 outsides slats out of the 3 wooden slats you have put down. Lift the middle slat out & repeat this process to get an equal distance between each wooden slat you installed.