Easy Steps And Items Required To Make A Simple Cutting Board
The kitchen is never a perfect kitchen if it is not having a cutting board. Mostly the users choose the cutting board that is made up of the wood material as wood is very durable and is having a versatile nature as well. The users can also make their own customized cutting board at home by gathering the below-mentioned material and then following the below-defined steps:
Items Required
- Drill Bit Sets, Measuring Tape, Power Drill
- Hand Saw & Pencils
- Sanding Sponge
Steps
- Choose The Type Of Wood Materials: The users are advised to choose the hardwood lumber material that should be having the unbound grain pattern and should be ideal to get used for the cutting boards. This type of wood easily holds up the sharp knives and is also having the natural resistance towards the moisture. The users are advised while choosing the material for their cutting board they need to select a kind of board that should not get wrapped off and it should also have the plain surface without any rough surfaces.
- Trim The Wood: Once the users have selected their type of wood for the cutting board then they need to calculate the measurements of the board and then mark down the board at the sixteen inches. Then the users need to trim down the board according to its measurements by using the hand saw.
- Build The Handle: Handle offers the simple grip so that the users can easily hang down their cutting board. They need to calculate the measurements and then mark down the one and a half inches from the side of the one corner so as to make the plus sign. Then the users can easily use the electric drill so as to make the hole in between the marked area of the wood plank.
- Sand It Down: The users then need to sand down the entire surface of the board including all the corners as well by using the fine-grit sanding block. The users also need to sand down the sharp edges of the board as well. If the users want to attain a professional look they can use the router to sand down the surface of the cutting board. Then they also need to clean off the sanding dust from the surface of the cutting board by using the damp cloth.
- Seal The Board: The users finally need to pour few drops of the butcher block oil over the rag and then rub the rag over the entire surface of the cutting board. They need to keep on applying the oil till the wood won't stop absorbing it and then allow the board to get dried off completely.