General Overview
Butcher Block Counter tops is actually a laminated wooden surface in which multiple strips of wood are glued strongly together sideways. The Wooden counter tops, that includes butcher block, are relatively very easy to install, fabricate and the user can finish it by doing the job himself. The user can order the raw, close-grained butcher block slabs from many home improvement and even from some flooring companies as well.
Safety Considerations
Some of the important safety consideration that the user should remember while installing the Butcher Block Counter tops are as follows:
- The Butcher block is made from hardwood, and the hardwood is very difficult to saw and drill.
- For sawing purpose, its important to always use a new and sharp saw blade and take the cuts slowly and carefully.
- Making the cuts in rush will cause the saw to hang up and can even kick back toward the user that can be very dangerous.
- The users are advised to use eye and hearing protection. Do not wear gloves while using rotary saws.
5 Easy Steps For Installation Of The Butcher Block Counter tops
In order to install butcher block counter top, the users need to follow the below mentioned steps carefully and achieve the desired result of installation:
- Measurements: Instead of using the measurements tap for measuring the dimensions of butcher block counter top, the user can achieve more accurate measurements simply by creating a template. One of the simplest ways of doing this is by using the long strips of the cardboard. Each strip should have a perfectly straight edge. Now lay down the strips over the top of the existing counter top as this will create the perimeter for the counter top. Cut strips with the hot glue.
- Cut The Butcher Counter Top: If the user is looking for the long and precise cuts the best option is to use the table saw or a circular saw that should be equipped with a track system. However, for the cost control, the user can use the straight cardboard as a guide for the saw.
- Install The Counter top Under this step the user needs to place the butcher block on top of the base cabinets. To hold down the counter top firmly or in place put a heavy, padded weight on top. Now the user needs to access the cabinet from underneath, bringing the portable work light or torch, braces screws and drill as well.
- L Shaped Corner Braces: Start by attaching the L-shaped corner braces from the bottom that should be perpendicular to wood elements in the cabinets. Most of the base cabinets have wood braces that are running at one or more points along the middle of the cabinet on large cabinets and on sink-base cabinets. The user should attach the braces to all these elements, as well.
- Sand And Finish: Before sealing the butcher counter top its important to sand a smooth surface with the fine-grit sandpaper using an electric sander. After that apply the mineral oil with the clean cotton rag to finish the job.