How To Get Hair Out Of Office Chair Wheels: Different Ways To Remove Hair From Office Chair Wheels

Different Ways To Remove Hair From Office Chair Wheels

In order to get rid of the hair from wheels of your office chair, you, first of all, need to take off the casters from the stem of the chair. Removing caster wheels is simple, due to the fact a lot of office chairs have removable caster wheels. If the wheels are removable, then remove them from the base in order to make sure they will be easier to clean. You might need to unscrew the base and with the help of a screwdriver, remove the wheels. Firmly, push it upwards and it will come right off. It can also be helpful when it comes to turning the chair upside down in order to pull out the base and wheels. Some have wheels that are generally easy to remove and can be done using your hands. If your chair has permanently fixed casters, then turn the chair over and have the legs facing up. As soon as you have set your chair in a good position, then you can start the process of getting the hair out from the wheels of your office chair. Here are several ways that can be used to get the hair out of your office chair wheels.

Way 1: Tweezers And Elbow Grease

The first and the simplest way when it comes to getting hair out from your office chair wheels is to pry it out using tweezers. You can use a simple pair of strong tweezers that will help you take hold of chunks of hair before pulling them out. You will, in all likelihood, need to break as well as tear the hair as you are working on it, however, it will take some time and it is a doable job. If you don't have tweezers available or you don't like to use it, then another option to use is a good pair of thin needle-nosed pliers, which will also allow you to reach narrow spaces. You simply need to take hold of the small amounts of hair at a time and tug to get rid of them. There is no need to put a lot of effort but wiggle back and forth in order to loosen the strands. The more hair you remove, the easier it will be to get rid of the rest of the hair from office chair wheels.

Way 2: Use Duct Tape

Using a bit of duct tape if you are looking to get rid of hair, including smaller pieces of debris, is another best way. The duct tape will usually help you lock the dirt before getting rid of it from the wheels of the office chair. Pull apart a section of the tape before placing a small part of the sticky side betwixt your index finger & your thumb. You need to smoothly or firmly place the tape on the hair before pulling swiftly, exactly the same way as you would wax the hair off your body. Repeat the process as long as you get rid of all the hair from the wheels of your office chair.

Way 3: Crochet Hook Or Hooked Needle

Crochet hook is a small hook that will help you reach underneath clumps of hair & allows you to pull & remove it from the wheels. It will help you take hold of the loops of hair & pull them loose & then you can either get rid of them or grab them with the help of tweezers in order to further pull to remove them. A simple needle as well as thread will allow you to make up a loop around the hair before pulling to remove it. However, you need to be extremely careful while using crochet hook or hooked needle, due to the fact that if it doesn't work, you will probably end up with hair and thread stuck in your chair wheels, which is not a good sign.

Way 4: Use Fire/Heat

Another great way when it comes to getting rid of hair from office chair wheels is to use a lighter and aim at the smaller strands of hair. Fire can usually help you reduce hair to ashes within no time. However, it is strongly suggested not to burn the wheels of your office chair, due to the fact that they are made of plastic. It is important to prevent the use of huge flames, such as a blow torch, instead, you can use small bursts of flames in order to burn the hair. A heat gun will be the perfect option as it will help emit strong heat without producing flames.

Way 5: Razors Or Scissors

If there is a lot of hair built up on your office chair wheels or it is very difficult to remove the hair, then it is important to use something sharp in order to cut through it. It is possible that the plastic of the wheels get a little scratched up, however, it will not affect how well it works, and the axle is metal and will be fine. You simply need to have something long and sharp, such as a pocket knife, a razor blade, or a box cutter and then cut across the hair continuously. As you cut chunks of hair, you can use tweezers or pliers in order to take hold of those chunks and pull them out. This will be a lot easier as compared to pulling at it normally, but it’s slightly dangerous, due to the fact that you are working with a sharp blade.

It is important to dry the wheels immediately after you clean them in order to prevent rust on the metal part of the wheels. To allow fluid movement of all the moving parts, you need to apply lubricant on the metal sections. You can also use lubricants that come with a long application tube in order to accurately get in between the wheels of your casters. In order to keep away from a greasy mess on your floor, you need to make sure not to apply lubricant on the part of the wheels that touches the floor. Re-attach the clean wheels to the base of the chair after thoroughly cleaning it, dried, and lubricated them. After everything is installed properly, test your chair on your office floor, and your chair should glide smoothly through the room. However, if you have been using your office chair for a long time, it is a good idea to inspect the casters as well as the wheels.