How To Fix Scratches On Wood Table: Steps To Repair Light Scratches On Laminate Wood Table

Steps To Repair Light Scratches On Laminate Wood Table

Here are some of the ways by which the customers can easily repair Light Scratches on the Laminate Wood Table:

Use the Wax Paints

1.Use The Sandpaper: Firstly the customers need to start by using the sandpaper and rub it vigorously all over the scratched area on the table. They then need to use a soft damp cloth and clean all the dust from the surface of the wood table.
2.Use The Lacquer Brush Pen: Customers then need to use the lacquer brush pen similar to the colour tone of the wood table. The users then need to apply the lacquer pen brush to the base of the scratch so that the lacquer pen can easily form the base colour.
3.Use The Wax Paint: The customers then need to apply the wax paint on the scratched area by using the palette knife and then let the paint dry completely.
4.Smooth The Painted Area: Once the wax paint is completely dried the customers then need to use the sandpaper and rub it over the painted area. They finally need to apply a layer of the sealant all over the surface of the cracked area.

Wax Filler Putty

1.Use The Latex Wood Filler: In this method, the customers need to start by spreading the Latex Wood Filler to the scratched area by using the putty knife made up of the plastic.
2.Remove The Excess Filler: The customers then need to use the putty knife and rub off the excess wood filler from the cracked area. They then need to let the wood filler dry completely for near about half an hour.
3.Use The Sandpaper: Once the wood filler is dried completely the customers need to use the sandpaper and rub it vigorously all over the wood filler. The customers then need to use a soft damp cloth in order to remove all the dust from the surface of the Wood Table.
4.Apply The Sealant: The customers finally need to use a soft rag and soak it into the wood sealant. The customers then need to rub the soaked rag over the scratched area. They then need to let the sealant dry completely for near about two hours before using the wooden table.

Wax Filler Sticks

1.Rub The Filler Stick On The Scratched Area: In this method, the customers need to start by rubbing these wax filler sticks similar to the colour tone of the wood table all over the scratched area on the table. The customers need to continue rubbing the filler sticks until the whole cracked area is filled.
2.Blend The Filler: The customers then need to blend the wax filler to all the edges of the cracked area by using the fingers. They then need to use a dry soft rag and wipe away all the excess wax filler from the surface of the wood table. The customers then need to let the wax filler dry completely for half an hour.
3.Examine The Scratches: The customers then need to examine the scratch on the wood table and if they find out that the scratches are not completely filled yet then they need to repeat the same procedure.