What Are The Steps To Fix Blotchy Stain On Oak?
Follow the below-mentioned steps in order to fix Blotchy Stain On Oak:
- Sanding: The first step in fixing the blotchy stain is sanding. Start the sanding process with the 180 grit sandpaper and then move on to the 220 grit sandpaper. The user can also use the orbit sander followed by the hand sanding, sand in the directions of the grains.
- Mineral Spirit: Once the sanding is done then wipe all the surface with the mineral spirit and then look for the scratches. If there are any scratches repair them as soon as possible.
- Gel Stains: In case the user wants a straight solution from the can with the predictable colors then gel stain is the best options.
- Washcoat: For the absolute protection to blotching use the Washcoat.
- Apply Gel Stains: Before applying the gel stain it is important that the surface should be sanded properly, then apply the even coat of the stain allow the gel stains to sit on the surface for almost 3 minutes and wipe the excess stain, apply the stain in the direction of the wood grain.
- Apply Washcoat: To create a wash coat mix 2 parts of the varnish with almost eight parts of the mineral spirit, Don't try to make the washcoat thin, after that apply the even coat of the solution, and then wipe the area for excess washcoat, and then allow the washcoat to dry completely.