Steam Cleaning Your Slate Flooring & Remove Stains
Your home can seem cool and fashionable with slate floors. Slate floors should be cleaned carefully, though, as some cleaners that are sold commercially could harm them. Cleaning slate flooring is simple when it comes to routine maintenance; simply sweep dust and grime off the surface with a standard mop. Despite the fact that weekly dust-mopping may reduce the necessity for a thorough clean, filth will ultimately accumulate, necessitating knowledge on how to clean slate floor tiles. Make sure your slate floor is sealed before cleaning it. Slate needs to be sealed to prevent spillage because it is so porous. To keep your slate floors shielded from dirt, reseal them once every two to three years (or as instructed by the manufacturer). For a chic matt finish, look for a non-slip sealer. On your slate floor, use a steam cleaner or steam mop. This is a useful method for cleaning grout and tiles in a gentle manner without harming your tiles.
The best approach to ensure that the floor is free of any loose dust or dirt before you begin cleaning is to do it this manner.
- Make Up A Cleaning Solution
Using a cleaner for slate floors, concoct a cleaning solution. These cleaning products are made to remove dirt and stains from slate flooring without causing any harm. Following the directions on the packaging and donning protective gear.
- Start Mopping
Begin sweeping process. Work in small groups to avoid missing any areas, and make sure the mop is well rung out to prevent getting the floor too wet.
- Rinse With Clean Water
Use clean water to rinse. ensuring once more that your mop is well rung out.
- Leave It To Dry
Let it air dry. To ensure that the floor dries as rapidly as possible, make sure the space is properly ventilated. A sponge mop can be used to remove extra water as well.
- Use An Old Toothbrush To Clean Grout
For cleaning grout, use an old toothbrush. For this, you can use a specialized grout cleaner. Check the box to determine if your slate floor cleaning product can also serve as a grout cleaner in particular circumstances.
Some General Guidelines
Some of the do's & don'ts while cleaning slate floors are listed below:Do
- To protect floors from heavy foot traffic, use rugs or mats.
- Yearly sealer application.
- Clean up spills right away.
- Use a pH-neutral or natural stone-specific mops to clean the surface.
- Move furniture around the room by carrying it rather than sliding.
- Make sure not to Utilize harsh cleaners or something with vinegar, lemon, or bleach in it.
- Do not move furniture across the floor without using a mat.
- To sweep your slate floors, do not use a vacuum with a beater bar.
Removing Stains From Slate Floors
- The ability of slate to scratch is greater than that of other types of flooring. If a scratch does happen, you might be able to cover it up by dabbing some mineral oil on it. Slate that has been properly sealed is stain-resistant, but if one does happen, you can use a stain-removal poultice made for stone flooring that is sold in stores.
- A flour and hydrogen peroxide paste can also be used to create your own homemade poultice. Apply it over the stain, cover it with plastic wrap, and let it sit for six hours or overnight. Then, using a soft scraping or a damp towel, you can remove it. Many applications can be required.