What Are The Steps to Stagger Laminate Flooring?
Here are some of the steps by which the customers can easily Stagger Laminate Flooring:
- Mark The Line: The customers need to start by measuring and marking the half-inch distance from the walls in various spots. The customers then have to draw the line adjacent to each wall by using the chalk in order to use the line for their guidance. The chalk line is usually used to signify their enlargement gap.
- Combine Different Wood Planks: The customers then need to unfasten the various cartons of the floating flooring. The customers then need to combine the wood planks from the different cartons in order to coordinate any minor differences in their wood coloring.
- Cut The Damaged Piece: The customers then need to trim the 2 or the 3-inch length from the flawed part of the laminate flooring. They then need to trim from the back side of the wood plank by using the round saw and they need to trim the wood planks from the front by using the handsaw. These trimmed pieces of the wood planks will become their spacers in the room.
- Place The Wood Planks: The customers then need to choose various wood planks in order to place it by the side of the lengthy wall of the room. The customers then need to place those wood planks simultaneously with the chalk line and the tongue of the wood planks should face towards the middle of the room. The customers then need to trim the wood planks in order to fix with the exact measurements of the room by using the saw. The customers should also allow some space on each edge of the row and also on each side.
- Place The Spacers: The customers then need to place the spacers between the wall of the room and the very first wood plank row. The customers also need to hold the spacers within the ends too.
- Place The Wood Planks In Other Row: The customers then need to organize the wood planks for the other row and for that the customers have to choose the different sized wood planks ideally and they need to arrange the wood planks in a way that joints should be somewhat near about 16 inches away from each other. The customers then need to trim the wood planks as per the exact measurements in order to get fitted to the row.
- Place The Wood Plank In The Last Row: The customers then need to follow the same procedure while placing the wood planks in the other rows till the time the customers will reach to the last row and for placing the woods planks in the last row they need to calculate the size dimension between the chalk line and the wood planks and then trim it accordingly in order to fit the last row of the wood plank.