Concrete is regarded as one of the most long-lasting & secure construction materials, however, the typically & distinguishing dull gray of a concrete slab can make it appear cold and unappealing, particularly, as flooring. The good thing for the homeowners is that concrete is also, to a moderately high degree, versatile material that provides many options for repairs, alterations, as well as improvements. You can get rid of the dried-on gunk by scraping, fill cracks, replace the color and even add patterns. If in case you have concrete floors in your basement, garage, or screened-in patio, you need to be extremely colorful & not dull. You can give new strength or energy to the entire space by painting your concrete floors. If you use the right tools and follow the right techniques, today’s masonry paints, designed particularly for concrete, you can easily turn a drab concrete floor into an attractive surface that can contribute extra features to a variety of spaces, both indoors as well as outdoors.
Easy Way Of Painting A Concrete Floor
The concrete floor must be entirely dry before you start painting the concrete floor. If in case your floor shows any indication of water seepage, the source of the water must be terminated before starting. Some of the materials that you use for this process need special masks as well as other equipment, due to fumes. You need to go through all the product labels carefully. Allow the floor to dry rigorously after each & every coating is applied. Rigorously wash the floor using a degreasing solution. Rinse several times as long as the mop is clean before allowing it to dry for several days. Collect the required tools & materials before going through the below-mentioned steps carefully & achieve the desired result of your work:
Tools & Materials Needed
- Hand Sander, Bucket & Tack Cloth
- Vacuum, Paint Roller & Mop
- 80-Grit Sandpaper
- Acrylic-Base Masonry Sealer
- Concrete Bonding Primer And Stain Blocker
- Degreasing Solution
- Acrylic Epoxy Paint For Concrete
Steps
- Sand And Vacuum The Floor: First of all, you need to sand off any old paint or any other areas that are not regular, consistent, or equal. After that, vacuum the entire floor, before wiping with the help of a tack cloth in order to get rid of any residue.
- Fill Cracks And Holes: If the surface of your floor is broken or rough, then combine or put together the concrete patch compound, in accordance with the package directions. Fill any cracks or holes in the concrete floor by applying the compound, with the help of a trowel in order to push it into any depressions. Rigorously, allow it to dry. If your floor surface is smooth, then you need to skip this step & proceed further.
- Apply Primer: Now, it is time to apply primer with the help of a paint roller, put or spread two coats of primer, allowing the floor to dry entirely betwixt coats.
- Apply Epoxy Paint: Next, with the help of a clean paint roller or paint compressor, spread at least two coats of epoxy paint, allowing the floor to dry entirely betwixt coats.
- Apply Masonry Sealer: Finally, put or spread numerous coats of masonry sealer with the help of a clean roller or compressor, allowing the floor to dry entirely betwixt coats.