Simple Steps For Building A Round Table
The round table gives a better flow and space utilization because there are no corners present to a round table. A round table is very well suited for the formal style dining rooms. If you wish to build your own round table, you can do so very easily, simply go through all the steps mentioned below carefully and achieve the desired result of your task:
- Base Of The Round Table: The first step is to build the base of the round table. The user needs to assemble all the components with the help of waterproof glue and pocket screws. Drill the pilot holes, and align both ends after secure by inserting the screws. It's very important to make sure that the corners are right-angled and then place the frame on the small pieces of 1×2 lumber, this will help to protect it from water damage as well as moisture.
- Attach The Legs To The Base: The next step is to secure the legs to the base, normally the legs can be 4×4. Before drilling pilot holes and inserting the galvanized screws its good to plumb the posts with a spirit level. The user can adjust the size of the legs according to need.
- Slats: Building the round tabletop is one of the most complex steps the user needs to mark down accurate guidance lines. Place all the slats on a flat level surface and then mark the center of the square. Fit the longest slat to the center of the tabletop and at the same time mark the circle with the opposite end. Then the user needs to use a jigsaw having a sharp blade to get the job done.
- Waterproof Glue: Once the slats are cut then lock them together with the help of waterproof glue and clamp them together tightly using several C-clamps. Attach several slats to the slats side by side.
- Attach The Legs To The Tabletop: After the glue is completely dried, the user needs to attach the legs to the tabletop. Simply place the base of the table over the top of the frame, drill the pilot holes and then insert 3 1/2? screws into the frame. It's important to make sure that the legs are plumb, with the help of a spirit level, otherwise, the table will be unstable.
- Finishing Touches: In order to achieve a professional result, fill all the holes as well as the gaps using a wood filler and then let it dry out for a few hours.