Ultimate & Easy Steps For Building A Bar Table
Making a bar table would complement the patio in a beautiful way, especially if there are already several nice chairs. There are a number of aspects that the user should take into consideration before starting the building job like adjust the size and the design of the table according to the needs. Select the weather-resistant lumber if the user is going to place the table outdoor. The cedar, pine as well as the redwood are excellent choices, these types of wood also have a nice natural finish. The steps to build a bar table out of wood are as follows:
- Side Frames: The first step is to build the side frames of the bar table. It's advisable to build the legs as well as the supports out of lumber. It's important to make sure to drill pocket holes at both ends of the supports before attaching them to the wooden legs.
- Lock The Two Sides: The next step is to lock the two sides of the table by fitting a stretcher. Before drilling pocket holes and inserting the galvanized screws into place its important to plumb the sides of the table with the help of spirit level. Align everything at each end, this will help to get the job done in a professional manner.
- Building The Frame: Now building the frame of the tabletop is a very simple and straight forward job if the user uses proper tools. Therefore, attach the aprons to both sides of the table, as well as for the middle support. After fitting each component check out if the corners are right-angled with the help of carpentry square.
- Attach Tabletop: One of the best steps of the process is to attach the tabletop. The easiest way to get this done is to use a pine panel. Properly align the panel on all the edges and secure it into place with the help of several screws. Using the drill, you need to drill pilot holes through each of the supports and insert the screws into the wooden panel.
- Finishing Touches: Fill out all the holes with the help of wood filler and leave it dry out for several hours. After the filler is dry smooth the wooden surface with the help of fine-grit sandpaper and vacuums the residues. With the help of fine-grit sandpaper, also sand around the bar table edges.
Tip
The user should apply several coats of stain or paint to the wooden components as this will help to protect them from decay and will also enhance the look of the bar table.