How To Fix Uneven Flagstone Patio: Step By Step Guide

Step By Step Guide To Fix Uneven Flagstone Patio

The flagstone is the genric kind of stone that is usually trimmed in square or in a rectangular shape. The flagstone is used to make the pathways, roofing, fences, and patios as well or it can also be used in other constructions and memorials. The flagstone is a mattered rock that can easily get splitter up in so many layers along with the bedding planes. This type of stone is made up of silica, sandstone, and other materials as well. Commonly the flagstone patio is less costly than the other traditional patios and they can be installed easily without seeking any professional help. The users can easily fix or install the uneven flagstone patio at home by going through the below-defined steps:

• Set Up The Level: Start by setting up a level by testing the evenness of the stone by using the mason string line. The line can easily guide the user to understand which stone they need to lift and which stones are in higher place then the line.
• Use The Hammer: Then the users need to use the sledgehammer made up of the rubber so as to collide those stones that are a bit high. Usually, this process can easily fix those stones that usually comes higher than their level line.
• Detach The Stones: Then detach those stones that have fluctuated necessarily and it is very difficult for the users to get them back in their place by using the sledge made up of rubber.
• Clean The Unneeded Sand: Then clean up the unneeded sand and then use the reverberate plate compactor so as to straighten the ground surface and then keep those stones in a level that are very high.
• Add The Sand And Cement: After that, the users need to add the cement and sand layer in those areas that are having the marking of the sunken stones and by doing this the users can easily bring higher those areas in a proper and correct ground level.
• Seal The Stone Joints: Finally distribute the polymeric sand and then sweep it all across the ground surface and then spray some water drops over it so as to seal down the joints in between the stones accordingly.