Comparison Between Wood Putty And Wood Filler
The difference between the Wood filler and the wood putty is that the filler consists of sawdust or wood fibers which are suspended in a binder, while the putty is usually made from a plastic-like epoxy, fiberglass as well as polyurethane. Moreover, unlike filler, putty will not become hardened. The wood filler is not weatherproof and this won't last outdoors. The comparison between them is shown below so that you can make the right choice for the woodwork project:
Wood Filler
- All the accidental gouges in the wooden floors, scratches to cabinets as well as the chipped furniture are all examples of problems which can be costly and also the time-consuming to fix. On the other hand, there is a very beneficial and convenient material available that anyone can use to fix these surface issues and can make the wood around the house look good all the time.
- The wood filler is a material that is used to fix any type of imperfections, gouges, as well as scratches in wood surfaces but prior to finish. However, there are some water-based fillers which can be applied even after the staining, these are not as resilient and can only be used in the indoors. They also are not best suited for items that have to face the high traffic areas, this is due to the fact that they are not as strong as their stainable counterparts.
- The solvent-based type of wood fillers are meant to fix almost any type of wood imperfection and can also be used to fix the issue for both indoors and outdoors. Once the filler is applied to the affected area than the piece will require refinishing.
- The filler is not a material for structural use. If in case the wood is damaged more enough to compromise the strength of the wood structure, then the wood filler is not going to help it maintain its rigidity. In this case, it is highly advisable the broken parts should be replaced.
Wood Putty
- Unlike the wood filler, wood putty is actually a non-hardening paste. It is widely used after a woodworking project is finished in order to fix out any remaining issues or blemishes. Typically the woodworks use wood putty to fix the nail or brad holes, it can also be used to fix the minor joint mismatches, or also the other minor imperfections.
- Where as the wood filler is used to correct larger problems, putty is best for fixing very minor issues.
- Most of the wood putty is available in a number of colors that can match the colors of the wood stains. This makes it very easy to use the putty to fix up all the small imperfections even when the project is already stained.
- The other thing about the wood putty is that it is easily applied with the help of a putty knife, or a finger in case the area is small, like covering a nail or the screw head. The user can easily wipe off the excess putty with the finger or using a damp rag and then allow it to dry. The putty is more firm, but it will never get completely harden. This property will allow the putty to expand as well as contract the same as the wood does in different temperatures and humidity.