Best & Mostly Used Products And Tips For Safely And Effectively Cleaning Marble
Marble is beautiful but will need special care as well as the proper marble cleaner to keep it in good condition. Thus, cleaning marble gives most people a lot of anxiety. Below the user will find key tips for safely and effectively cleaning marble along with the best marble cleaner products:
Products For Stain Removal
- Apply A Poultice: Mix-up the baking soda with the water to the consistency to form a thick paste. After that apply it gently on to the stained patch on the marble. Then you need to cover with the plastic wrap and leave it to rest for about 24 hours. The user can also make a poultice simply from the flour and nonabrasive dish soap then apply it using the same method. After the 24 hours remove the poultice, lift up the wrap, and then use a damp cloth to wipe away all the poultice. If in case the area is still stained, then repeat the process.
- Try Hydrogen Peroxide: The other product to use is the hydrogen peroxide, put a little hydrogen peroxide on the affected area. Then again cover with the plastic wrap and wait for twenty-four hours. Remove the plastic wrap and wipe away the peroxide with the help of a damp cloth, repeat if required. Be very careful with this method if the marble is dark in color, this is because the hydrogen peroxide can easily lighten marble.
- Use Corn Starch On Grease Spots: In case of grease, simply sprinkle a bit of the corn starch on the grease spot and then allow it to absorb the grease for about 30 minutes. After that Wipe away all the corn starch using a damp cloth.
Products For Scratch Removal
- Use Fine-grain Sandpaper: For the deeper scratches, try rubbing out the spot lightly with the help of very fine-grain sandpaper. It is advisable not to use the coarse-grain sandpaper, as this can easily create divots in the marble.
- Gentle Cleaning: Use the warm water and a soft cloth, after that gently rub out the scratch. Lighter scratches must be rubbed away with this tip, and it is the best way to treat a scratch. In order to create more friction add mild dish soap to the warm water if user wises. Wipe away all the soapy water and then dry the surface of the marble once finished.
Tips
- It is advisable not to use the common cleaners like bleach, vinegar, hydrogen peroxide, as well as the ammonia as these can etch marble leaving dull spots, rings. The etching is actually a chemical burn on the marble surface which needs re-polishing.
- Avoid all the acidic and citrus cleaners. Acidic cleaners having a low pH like the vinegar, or citrus (lemon-orange) will also etch marble.
- The alkaline marble cleaners are okay to some extent. Any cleaner with the pH value above 10 can etch marble that is why the bleach and the ammonia (pH 11) are not good for cleaning marble.
- Avoid all the abrasive cleaners or the pads that may scratch the finish.
- Most of the soaps will not harm the marble countertop, but if they are used regularly, then they will leave a film just like in the shower.
- Also do not use name-brand cleaners like Windex, 409, Tilex, lime away, kaboom, CLR, and Lysol.