Restoring Cast Iron Garden Furniture: Steps To Fix Wrought Iron Patio Furniture


Steps To Fix/Restore Broken Wrought Iron Patio/Garden Furniture

The users can easily fix/restore their broken Wrought Iron Patio/garden Furniture by following the below-mentioned steps:
  1. Use The Sandpaper: The users need to start by using the 600-grit sandpaper and rub it vigorously over both the broken edges. Then they need to use the mineral spirit and soak a soft rag in it. After that, they need to rub the damp rag over the entire surface of the Wrought Iron furniture item to remove all the dirt and grease accordingly.
  2. Make The Epoxy Resin Paste: Make a mixture of the epoxy resin according to its manufacturer instructions. The top-grade epoxy resin requires the base and the catalyst paste and then the users need to mix both the pastes altogether to create a clay-like a mixture.
  3. Apply The Epoxy Resin Paste: Apply the epoxy resin to the broken edges of the Wrought Iron furniture to affix the broken pieces. Use the clamp to secure the broken edges of the wrought iron furniture item.
  4. Apply The Paste To Outside Area As Well: After affixing the clamp apply the epoxy resin to the outside area of the broken pieces to add the strength to the broken side of the Wrought Iron Patio Furniture. Then allow the epoxy resin to dry for almost 24 hours before using the Wrought Iron Patio Furniture.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved