Step By Step Easy Process To Wire Two Switches To One Light Fixture
If you are looking to improve or customize the lighting system in your home, you can do it easily as it not not a difficult process. However, if you want to replace a light fixture with two switches, then it is not an easy process as the most experienced do-it-yourselfers can sometimes cringe. Long entranceways, large rooms having two entrances as well as dark staircases usually have two switches when it comes to operating the same fixture. This is generally known as a three-way circuit that usually needs an electrical wire when it comes to connecting the two switches together. The mass of wires present inside the light fixture’s electrical box can be alarming, but if you pay full attention on the lighting wires only, there will be having no issues when installing a new fixture. Go through the below-mentioned step by step process carefully in order to wire two switches to one light fixture:
- Remove The Light Fixture's Shade: Firstly, take out the light fixture’s shade from the light fixture in order to examine the light bulbs as well as sockets. This will vary which is entirely dependent on the manufacturer of the fixture and the style. Switch off the 15- or 20-amp lighting circuit breaker that gives power to the light fixture as well as the two switches. Pull out the light bulbs from the light sockets.
- Place A Non-contact Voltage Sensor Next To Light Sockets: Position a non-contact voltage sensor alongside the light sockets. The voltage indicator light will not light up as soon as the electrical power is disconnected. Find out the two screws in the bottom of the fixture near the light sockets. These screws take hold of the light fixture to the electrical box inside the ceiling. Get rid of the screws, letting go the fixture from the ceiling as well as exposing the electrical wiring.
- Untwist The Connector: Go or come after the black electrical wire from the light fixture to the wire connector. Take hold of the non-contact sensor alongside the connector in order to make sure the power is off. Lay out the connector taking hold of the fixture’s black electrical wire to the black electrical wire from the ceiling box. Lay out the connector taking hold of the fixture’s white electrical wire to the white electrical wire from the ceiling box.
- Remove The Wire Connector In The Electrical Box: Remove the wire connector taking hold of the light fixture’s green ground wire to the bare copper ground wires in the electrical box. Do not pull out any of the remaining wire connectors inside the electrical box, due to the fact that these connectors complete the three-way connection betwixt the two switches.
- Follow The Directions To Assemble New Light Fixture: Read or go through the directions when it comes to assembling your new light fixture if assembly is necessary. Connect the white electrical wire from the light fixture to the white electrical wire from the electrical box in the ceiling by warping an orange wire connector onto the wires.
- Make The Final Connection: Bring together the fixture’s black electrical wire from the fixture to the black electrical wire from the ceiling with another connector. Make the final connection by warping an orange or yellow wire connector onto the green grounding wire from the fixture to the bare copper ground wires in the ceiling box.
- Position The Fixture Against The Ceiling: Place the fixture in opposition to the ceiling. With the help of the mounting screws provided with the new fixture, attach or secure the fixture base to the electrical ceiling box.
- Install Light Bulbs: Finally, it is time for the installation of light bulbs in your new fixture and attach or secure the light shade. Switch on the light fixture’s circuit breaker providing electricity to the three-way circuit.