Methods For Removing Grout Haze From Tile
Grout haze is regarded as an irritating, annoying as well as an unattractive side effect of tiling, and to add to its troublesome, it’s usually not visible as long as the tiling process is complete. There are unique ways of hazing for different kinds of tiles and there are separate grout cleaners that work better in different situations. Natural stone tiles, porcelain tile, as well as ceramic tile all take to grout uniquely. Furthermore, the grout type used on your grout lines plays a huge role too, for instance, cement grout and epoxy grout adhere very differently. The best time to deal with grout haze is immediately after grouting, no matter what type of grout you use. After removing the grout and adding a new one, give the fresh grout at least a day or two in order to firm up and set, and try the following methods to eliminate grout haze on the tiles.
Supplies Needed
- Cheese Cloth Or Terry Cloth
- Mild Dish Detergent
- Commercial Cleaner
- Vinegar In A Spray Bottle
- Cloth, Mask & Rubber Gloves
- Flashlight & Nylon Pad
Method 1: Give It A Scrub
First of all, you need to start simply with cheesecloth, terry cloth, or a nylon pad and water, before trying through commercial cleaners.
- Put on a mask and gloves & then wet through the cloth or pad.
- Squeeze and twist it out exceptionally well, due to the reason that it needs to be moderately damp, not wet.
- Smoothly wipe & clean the tiles using the cloth, paying special care along the grout lines.
- Use a flashlight in order to make sure that you don't miss out on any side of the grout without getting clean.
Method 2: Vindicate With Vinegar
If in case the cheesecloth was not good enough to remove the grout haze and you have porcelain or ceramic tile, then you can go with vinegar in order to add a little more power to your haze fitting cleaning method. Go through the below-mentioned simple steps carefully:
- First of all, make a mixture of 1 to 4 vinegar parts with a water cocktail.
- Wet the nylon pad as long as it is fully damp.
- After that, wipe as well as clean the surface.
- Then, soak the nylon pad in the vinegar mixture & squeeze it out perfectly.
- Wipe & clean the haze down with the help of a vinegar mixture.
- In case of stubborn areas, you can add to the vinegar concentration.
- If in case the haze still remains on the grout, then a commercial cleaner is the best option to go for.
Method 3: Try A Mild Detergent For Porous Tiles
Porous tiles should never be cleaned using an acidic cleaner. For these tiles, try mild dish soap and water. Gather the materials and follow the steps below carefully:
- Firstly, make a mixture of a drop of dish soap with at least 3 cups of water.
- After that, wet through the nylon pad with water.
- Wipe as well as clean the tiles down with the help of a damp pad.
- Then, soak the pad in the detergent mixture.
- Wipe as well as clean the tiles again & make sure to fully concentrate on the haze that collects near the grout lines. Follow with water.
- If it worked, then it is good, if not, then it's time for a commercial cleaner.
Method 4: Commercial Grout Haze Removers
As far as the stubborn grout haze is concerned, go with a commercial cleaner, which is available in all different brands, however, they are particularly formulated to cut through grime and get rid of a cement-based grout haze, which can be very hard to remove. For this cleaning technique, follow three easy steps mentioned below:
- Firstly, soak your cheese or terry cloth in the cleaner.
- After that, scrub the tiles but be very careful while scrubbing the new grout.
- Repeat as long as all the haze is completely gone.