Two Easy Ways Of Repairing Cracks In Quartz Countertop
The Quartz countertops are usually known for their sturdiness and that is why they are considered as the fuss-free choice for the kitchen areas. The quartz countertops are crafted from the resin and the stone material as well. The quartz countertops are very hard but at the same time, they are having a pleasing appearance and are having the non-porous surface as well. In spite of the fact that the quartz countertops are very tough but sometimes it can get cracked or chipped because of certain kitchen accidents. The users can easily repair the quartz countertop at home by following the below-mentioned easy ways:
Way I: Repairing The Minor Chips
- Clean The Countertop Surface: Start by cleaning the countertop by using the cleaner that contains the ammonia. Before the users start with the repairing process they need to clean off the entire countertop area by using the non-abrasive cleaner. They need to spray the ammonia cleaner and then wipe down the entire area by using the soft wet cloth. Then allow the countertop surface to get dried off completely before proceeding towards the repairing process.
- Use The Masking Tape: Then they need to stick the masking tape all around the chipped area so as to forbid the sticky stains and to offer the perfect finish. Then the users need to shut in the chipped area by sticking the masking or painters tape all around it. By doing so the users can easily apply the adhesive material to the chipped area so as to offer the clean finish.
- Fix Off The Cracks: Then they need to fix off the cracks on the light-toned countertops by using the superglue. The superglue or the adhesive filler both can be an ideal option for repairing the minute chips over the light-toned countertops as they cannot be noticed rapidly. The users need to use the spatula or the brush so as to apply the glue layers over the affected spot until they won't find out the chip is in level with the other countertop surface. Then allow the super glue to get dried off completely for near about one day. The users are advised not to apply much super glue as that can extend the drying time.
- Use The Colored Material: Then they need to use the colored adhesive materials for the dark or the textured countertops. If in case the users are having the countertop that is of the dark-toned or is textured then they need to use the colored epoxy material. In order to attain good results, the users need to mix their epoxy material with the dye and then apply this mixture to the cracked spot on the countertop till it is not in level than the rest surface of the countertop. Then allow the epoxy material to get dried off completely for near about one day. The users are advised to overfill the chipped material as the epoxy usually gets shrunk while drying off.
- Use The Sandpaper: Once the glue gets dried off then the users need to use the fine-grit sandpaper and then rub it over the entire surface of the patched spot so as to attain the smooth finish.
Way II: Patching the surface by Using The Caulk
- Clean The Area: Start by cleaning the entire cracked area. The users need to use the wet cloth and the non-abrasive material so as to wipe down the entire area before they start the repairing process. Then allow the surface to get dried off completely.
- Use The Masking Tape: Then they need to stick the masking tape all around the cracked area so as to forbid the caulk stains and to offer the perfect finish as well. Then the users need to shut in the cracked area by sticking the masking or painters tape all around it. By doing so they can easily apply the caulk material to the cracked area so as to offer the clean finish.
- Apply The Caulk Material: Then apply the caulk material directly to the cracked area. The users need to apply the caulk slowly to the biggest crack portion with the gun or the caulk tube. Then move the gun to the rest of the remaining crack portion of the countertop. If in case the users want to create a smooth line then they need to use the silicone caulk and they can also use the acrylic caulk. The users are advised to wear rubber gloves if they are using silicone caulk.
- Use The Utility Knife: Then they need to evenly level the caulk material. They need to wipe away the unneeded caulk material or the sealant and then use the flat material like the plastic so as to smoothen down the caulk line. The users need to repeat the same procedure till they won't find that the chip is at the level with the other countertop surface. The users then need to clean up the unneeded dried caulk by using the utility knife by slowly running the knife to the other affected spot.
- Remove The Masking Tape: Finally the users need to detach the tape and then allow the surface to get dried off completely. If the users are completely satisfied then they need to detach the tape and then let the caulk to get cured completely.