Step By Step Process To Paint An Aluminum Door Threshold
The majority of the entry doors usually have an aluminum threshold. Aluminum is regarded as a durable metal that doesn't rust, making it one of the standard products. However, currently there is a trend in home finishes that are usually in favor of bronzes and other darker metallic. In order to achieve this look, it is extremely important to paint over the aluminum. Take into consideration that a painted threshold will not wear as cleanly as the aluminum will on its own. However, if you are prepared to repaint every few years, then you can change the appearance of your threshold with a little work. In order to paint an aluminum door threshold, first of all, you need to collect the required items before going through the below-mentioned step by step process carefully:
Things You'll Need
- Small Wire Brush & Shop Vac
- Soap And Water & Bucket
- Old Toothbrush, Sponge & Rag
- 220 Grit Sand Paper
- Denatured Alcohol
- Painters Tape
- Primer For Aluminum
- Epoxy Paint
- Paint Brush
Step By Step Process
- Scrub The Threshold
First of all, scrub the threshold with the help of a small wire brush (brass works well). It is important to get rid of all the ground-in dirt from the tiny crevices as well as in the corners next to or adjoining to the wood moldings. - Vacuum The Debris
Now, you need to vacuum the debris. Keep brushing the threshold as long as you are absolutely sure that all of the grit is removed. - Remove The Dirty Water And Residues
Next, scrub the threshold with the help of soap, water and an old toothbrush. Use a sponge in order to get rid of the dirty water and residues. - Sand The Threshold With 220 Grit Sand Paper
Sand the threshold using 220 grit sand paper in order to rough up the surface and to get rid of any additional materials. Scrub the threshold again and make the threshold dry thoroughly. At this point in time, it should be very clean and ready to paint. Wipe the threshold with the help of denatured alcohol in order to get rid of any oils acquired from touching the threshold using your hands. - Tape Off & Prime The Threshold
Tape off as well as prime the threshold. Usually, you can find clearly defined or identified aluminum primer in spray cans. Simply safeguard surrounding areas from overspray if you use a spray product. Apply & spread at least two coats. Spray coats generally dry within an hour. - Apply An Epoxy Paint
Finally, apply an epoxy paint that is specially made to cover aluminum in the paint color of your choice. Remember that this is a high traffic area. Allow the paint to dry, before applying additional coats. Check & go through the manufacturer's directions when it comes to drying time for your epoxy choice.
Tip & Warning
- Epoxy paints are usually used on high traffic floors, and they hold up extremely well if the surface is well prepared and the epoxy is applied & spread properly.
- Make sure to paint an aluminum door threshold at a time of the year where the door can remain open for a few days without using the doorway.