How To Use Bissell Carpet Cleaner: Proper Procedure Of Using Bissell Carpet Cleaner


Proper Procedure Of Using Bissell Carpet Cleaner

In order to get rid of dirt or grime from your carpet, you can use Bissell carpet cleaner which will help you in removing the carpet grime quickly and easily. Before you start using a carpet cleaner, first of all, pretreat heavily soiled areas. After that, run the machine smoothly over your carpet, draining as well as refilling the water tank on occasion. Keep your carpets in perfect condition & looking fresh & new by using a carpet cleaner several times a year.

Step 1: Pretreating The Carpet

  • Clear The Area Of Any Furniture: First of all, shift or relocate any furniture off the carpet and out of the room, if possible, which in turn, will help you to maneuver and reach stains in tight spaces. If in case any furniture item can't be relocated, then you can work around the furniture. Move the carpet cleaner around with utmost care in order to prevent leaving marks or scratches on the furniture.
  • Vacuum The Carpet Thoroughly: Pretreat the carpet with the help of your regular carpet vacuum. Make a few passes in order to get rid of as much dirt as possible. This keeps away the dirt from being worked further into the carpeting later. With the help of a traditional vacuum having a beater bar on it, get rid of any dry soil from the carpet, along with any other debris. You can also use a carpet rake to eliminate additional pet hair if needed.
  • Treat Heavily Stained Areas With A Carpet Shampoo (optional): You can also apply carpet shampoo to those areas that are having a lot of foot traffic as well as any deep stains. You can either spray the shampoo directly onto the carpet or blot it on with the help of a wet paper towel. You generally need to allow the soap to soak in for nearly 3 minutes before operating the carpet cleaner.

Step 2: Setting Up The Cleaner

  • Fill The Water Tank With Hot Water: Disengage & remove the tank on the carpet cleaner’s front end. It is important that hot water is flowing from your sink’s faucet before putting the tank’s spout under it. The tank will have a line, nearly ¾ of the way up, specifying how far to fill it. When it comes to locating and removing the cleaner’s tanks, go through your owner’s manual carefully. Generally, you simply need to lift up some plastic clips in order to free the tank.
  • Add Carpet Cleaning Formula To The Water Tank: Now, select one of the many carpet cleaning formulas that are available at any general store. This is an exceptional formula specially formulated to work with the carpet cleaner, so it is different from carpet shampoo. The tank will have a second fill line over & above the first one. Pour the formula directly into the hot water as long as it reaches that line.
  • Set The Cleaning Dial If Your Cleaner Has One: Discover the dial situated on the front side of the cleaner, next to the tank. The dial will have settings for light, normal, as well as heavy cleanings. Entirely dependent on how dirty your carpeting is, choose the correct setting and adjust it as you go.
  • Turn The Tools Dial To The Floor Cleaning Option: The tools dial is the large one on the highest or uppermost point of the water tank. Spin the dial as long as the marked arrow on it points down, in the direction of the floor cleaning option. Your carpet cleaner machine is now loaded and ready to go.

Step 3: Cleaning The Carpet

  • Flip On The Power And Heater Buttons: Connect the power cord into a nearby outlet, before locating the buttons on the cleaner's back. Press both buttons down in order to turn the machine on and activate its heating system.
  • Pull The Handle’s Trigger While Moving The Cleaner Forward And Back: Pull the trigger in order to spray water onto the carpet. When you are taking hold of the trigger, push the cleaner forward, before pulling it back. Pay special attention to cleaning small areas at a time by running the cleaner forward as far as you can reach without walking.
  • Let Go Of The Trigger To Make A Dry Pass Over The Same Area: Go back over the same area, but, this time without pulling the trigger. Run the cleaner forward again, before pulling it back in order to suction up the dirt and water. Keep doing this as long as no more water can be pulled up from the carpet. You can see this by watching the tank considering no more water will flow into it.
  • Continue Cleaning Until The Water Tank Is Full: You may need to run the cleaner smoothly over heavily soiled areas again. Pull the trigger, which will help spread more water and formula, then try a stronger cleaning setting if it is needed. Proceed on to other areas, alternating betwixt wet and dry passes to get rid of dirt.
  • Empty The Water Tank When It Fills With Dirty Water: As you use the cleaner, it sucks dirt as well as water into the tank adjoining the water tank you filled earlier. It also has a fill line manifesting its maximum capacity. As soon as the soiled water reaches this line, pour it out into the sink.
  • Refill The Clean Water Tank To Continue Cleaning: Now, again run the hot water. Using the guidelines, fill up the tank with water and formula. Your cleaner will be ready again. Totally dependent on the size of your carpets, you will need to flush out the dirty water and refill the tank numerous times before you are finished using the machine.
  • Attach A Tool To The End Of The Hose To Clean Hard-to-reach Areas: Some carpet cleaners come with a hose and extra tools, including a vacuum attachment. Move the tool smoothly into the free end of the hose in order to tackle areas, like tight corners or stairs.
  • Set The Tools Dial Before Using The Tools: The tools dial is the large one you put, lay, or stand to the floor cleaning option earlier. Spin the dial to point up in your direction. This is the tools option, which changes the power settings from the floor cleaner to the hose. Use these tools in order to finish up the last of your carpet cleaning.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved