A huge amount of mold plague can make your home look unpleasant and it can also affect your health badly. So, it is very important, at first, to learn how to get rid of the mold from the wood studs. Mold is regarded as a major-league problem. It can have an adverse effect on some of the parts in your homes, such as it makes the grout lines in your shower look dirty, blemishes drywall, black spots appear on the siding, blackens decks, and extends and rots damp wood everywhere. One of the worst parts about the presence of mold is that it can affect your health. The mold spreads microscopic spores that give rise to allergic reactions, sneezing, as well as irritating and even undesirable odors.
Step By Step Process To Kill The Mold On Wood Studs
As you must be knowing that wood is an organic material, therefore, mold can grow on it very rapidly. If in case you allow the mold to be present on the wooden studs for a longer duration of time, then it will have ugly stains on the studs and also affect your health. In order to avoid the mold from becoming larger or greater over a period of time, first of all, you have to ensure that the humidity level of the room is very low. The best way to keep the humidity level low is to use a dehumidifier. Gather the required items first & then go through the step by step process to kill the mold from the wooden studs. As soon as you have killed or removed the mold, it is very essential to put preventive ways in place in order to avoid its reoccurrence.
Items Needed
- Bucket
- Water
- Bleach
- Sponge Or Cloth
Step 1: Mix Bleach & Warm Water
The first and foremost step is to make a mixture of bleach and warm water in a 5-gallon bucket. If in case you have unpainted wooden studs, then in that case you have to make a mixture with 3 parts water to 1 part bleach. However, for painted wooden studs, it is important to use 3/4 cup bleach for every 1 gallon of water.
Step 2: Scrub The Mold
The next step is to dip a sponge or cloth in the above-created mixture and then make use of it to scrub away the mold. You need to make sure to squeeze the additional amount of water from the sponge or cloth in order to avert too much water from being sucked up by the wood.
Step 3: Make It Dry
After the above steps are done, now it is time to make the wood to dry entirely. If necessary, you can go for the cleaning process again. You can perform the cleaning process on the wood as many times as needed in order to get rid of all the mold, but let the wood to dry entirely between each cleaning.
Step 4: Clean The Wood
Lastly, rinse the wood one final time with the help of plain water. After performing all these steps carefully, your wooden studs will be mold free completely & your studs will look attractive.