How To Stop Bathroom Ceiling Paint Peeling: Easy Process Of Repairing A Bathroom Ceiling Paint Peeling
Easy Process Of Repairing A Bathroom Ceiling Paint PeelingPeeling or bubbles usually starts to appear when you are painting in high humidity or when you apply the paint over built-up water as well as soap scum. Generally, peeling can take place around the things you use every day including the shower, sink, and toilet. Improper cleaning, prep, as well as priming are some of the other reasons that cause bathroom ceiling paint to peel. When you are painting your bathroom ceiling, it is important to give enough drying time between coats, otherwise, your ceiling paint will peel quickly. This severe cracking found on ceilings is usually called ”alligatoring”. It’s extremely important to give your coats of paint, particularly in the bathroom, a sufficient amount of time to fully dry.
Step 1: Remove Chipped PaintWhen it comes to repairing the bathroom ceiling, first of all, you need to remove the chipped paint, with the help of a putty knife or paint scraper, but make sure to carefully move the putty knife along the loose edges. It is important to get rid of all peeling or flaking areas as long as the wall, as well as the ceiling, only has firmly adhered paint on them. Keep a trash can or other receptacle ready in order to make sure that you are able to catch the loose paint chips as they fall and line the floor using a drop cloth in case you miss any flakes. Due to the fact that small flakes of paint may fly through the air, it becomes necessary to wear protective eyewear as well as a dust mask as you work to prevent getting paint chips in your eyes or inhaling particles.
Step 2: PatchingAs soon as the chipped paint is gone, the surface will now be uneven because some areas will have a layer or more of paint and others won't. In order to create a smooth surface when it comes to repainting, you can use a patching compound to even out the walls as well as the ceiling. Select a quick-setting patching compound before applying it in a thin, even layer with the help of putty or a broad knife. Dry the first coat & as soon as it is fully dry, apply a second layer, if necessary. Finish using a layer of all-purpose drywall compound before allowing it to dry overnight.
Step 3: SandingAfter the patched areas are dry, then it is time to sand them in order to make sure that there are no ridges or uneven edges. On the walls, you can sand by hand with the help of sandpaper. Sandpaper can also work on the ceiling, however, it will, in all likelihood, create a large amount of messy dust. Therefore, instead of sandpaper, you can use a shop vacuum outfitted with a dust collection bag as well as a sanding attachment. The vac will gather all of the dust as you sand, so there is no mess to clean up afterward. However, you should still use goggles as well as a dust mask while sanding in order to protect your eyes and lungs.
Step 4: PrimingYour bathroom walls as well as the ceiling will, in all likelihood, start peeling in the first place, due to the reason that they were not properly primed. In order to prevent the same problem in the future, you can use an oil-based primer with stain-blocking properties before you start painting. The primer will also help prevent watermarks on the walls as well as the ceiling and prevents the patching compound from getting wet and causing the paint to peel due to the humid conditions in the bathroom. It also helps in preventing mildew growth.
Step 5: RepaintingAs soon as your primer is dry, you can repaint your bathroom walls as well as the ceiling in any color you select. But make sure to select the right type of paint if you are looking to prevent peeling and flaking in the future. Look for a formula that is marked categorically for use in bathrooms. This type of paint has a high-gloss or semi-gloss finish and is also washable. It also does not soak up moisture as readily as other types of paint, therefore, it stands up to humidity well. If you are worried about stains, select a paint designed to resist mildew.