How To Sew A Couch Cushion Cover: Steps To Sew


Steps To Sew A Couch Cushion Cover

  1. Fabric: The first step is to buy enough fabric that will cover the cushion. The best way to buy the fabric is to measure the dimensions of the front side and multiply by two. Double the measurement number to get the total area for both sides of the cushion.
  2. Lay: The next step is to lay the fabric on the work table with the correct side down, then with the help of the tailor's chalk mark the dimensions, but while making the line keep 1/2-inch seam allowance, use this step for the front side.
  3. Other Fabric Section: The next step is to draw the dimensions on the other section of the fabric, same as above but this step is for the back of the cushion cover.
  4. Second Back Piece: Now the step is to lay the second back piece of the fabric on the work table. After that carefully Fold the fabric back along with the 1-inch wing. Then carefully press it flat with the help of iron. Use the best quality fusible seam tape to finish the edge or the user can even tuck the raw edge under and fix it with thread.
  5. Velcro Tape: Cut the Velcro tape according to the length. However, the length should be at least 1 inch shorter than the overall height of the cushion to manage the seam allowance. In order to attach the Velcro, center one piece of the velcro on the folded edge of back fabric, then sew it, repeat the process for the right side of the cushion cover back and sew it.
  6. Pin: Now the step is to pin the three pieces of the cushion cover right sides together.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved