What Are The Steps To Stitch a Box Cushion Corner?
Here are some of the steps by which the customers can easily stitch the Box Cushion Corner:
- Cut Two Fabric Pieces: The Customers need to start by Cutting two equal sized fabric pieces. They need to make sure that the fabric pieces should be near about 1 inch longer than another finished cover.
- Place The Fabric Pieces: The customers then need to place the equal sized fabric pieces on a flat surface and then place the fabric pieces in a way that their right sides should be together.
- Make The Marks: The customers then need to make a mark near about 3 inches from each corner of the fabric pieces to each corner of cushion accordingly. The customers then need to make a mark near about 1/2 inch at each edge facing towards the center area of cushion respectively. The customers then need to mark the new cutting line that will get started from 3 inches and will then point to the half inch mark. The customers then need to trim the new marked line.
- Stitch The Area: The customers then need to Stitch all around the area and they need to keep the half inch seam adjustment. They then need to leave near about 8-inch gap.
- Trim The Seam Allowance: The customers then need to cut the edge seam adjustment and trim the crosswise corner seam adjustment and then they need to leave near about 1/8-inch seam adjustment at the edge tip.
- Turn The Fabric: The customers then need to twist the fabric cover towards its right side outside. They then need to gently apply some pressure to the corners and then they can fill in the filler material in this cushion and then they need to use the thread and the needle to close the opening gap.