Easy Steps To Secure Or Attach The Ikea Kitchen Island To Floor
Adding the Kitchen island instantly boosts the kitchen storage as well as work space, which makes the space more beautiful and functional. The user can easily secure the Island so that it seems more permanent and will also keep it from shifting while cooking. When the user secures Ikea Kitchen Island To the floor, then they need a secure attachment that makes the island very stable.
Considerations
Some of the Considerations that will help the user for securing the Ikea Kitchen Island to floor are as follows:
- The Island Cabinets that are Secured along the walls in the kitchen are very easier to install because the user can screw them directly to the studs that are in the walls.
- In case of the Islands in which they are secured to the floor, installation can be more difficult since the user has to fix them to the floor only. The user doesn't have the security of wall studs which helps for attaching the sides.
- One of the best ways of achieving secure installation is by adding wood cleats to the floor so that the user can screw the Island to them, this will make the bond strong. The Wood cleats are simply two-by-two boards that are cut to length and then screwed to the floor on all the sides(Four). The cabinet fits adhere over the cleats better and will hold it from moving.
Steps
The easy steps that the user can follow to attach the Ikea Kitchen Island to the floor are as follows:
- Layout: The first step is to layout cabinets on tile floor where it needs to be installed.
- Mark And Built: The next step is to mark and built the frame according to the size of the Ikea island, in order to secure frame on top of tile floors, simply mark the area where the holes are present. Here the user needs to know that the size of the hole should be slightly larger than the screw to be used.
- Drill: After marking the points for holes then use the diamond bit on a drill and start drilling down through the tiles or concrete floor. For the underlying mortar, it's advisable to use a masonry bit to get through the mortar and make a hole. The user can use the regular bit to drill through the Ditra and subfloor.
- Long Screw: The user should use a fairly long screw so that it can go through the frame, into the drilled hole.
- Sub floor: Underneath the sub floor, it is important to secure the passed screw into a block. Secure the block to joists.
- Fastened To The Blocks: The key for the best results is the fact that the frame should be fastened to the blocks that are secured to joists very strongly.