How To Seal Wood Before Painting With Acrylics: Step By Step Process Of Sealing Wood Panel


Step By Step Process Of Sealing Wood Panel Before Applying Acrylic Paint

Sealing a wood panel is considered one of the best & advantageous options to perform before applying acrylic paint on it. You can make the surface of your wood panel smooth as well as flat and then safeguard it by sealing before going for the painting process.

Why Seal A Wood Panel?

Sealer safeguards the wood materials and has a tendency to make it look glossy, non-absorbent substance that looks after the wood surface by generating a barrier. Make sure to preserve your wood panel by applying a sealant to it before going for the painting process. The natural chemicals that are present in the wood material can disintegrate a painting over time, however, sealing safeguards wood from this issue. Sealants make the surface very smooth and come up with an even exterior to wood. The paint will not be sucked up into the wood pores as soon as the sealer is applied so the topcoat will adapt better on the surface. If in case you apply paint without sealing, then it may get bend or can cause other damage to your wood panel.

Step By Step Process

  1. First of all, wash out the wood panel & make sure to get rid of dust and other particles with the help of a cloth or duster. You may need to sand the wood in order to open the pores of the wood. If in case you are having Trekell panels, then there is no need for sanding as it comes pre-sanded.
  2. The next step is to position the panel flat on a surface. It is not mandatory, however, you can support it up on all the 4 corners with the help of wood props in order to help make the application of sealer easier.
  3. Now, put on a light layer of sealant, with the help of a roller or brush, to your wood panel. Some of the homeowners like to protect all sides as well as corners of their wood panels, but you can also seal only the front as well as the back.
  4. Next, allow the sealer ooze into your wood panel & then make it fully dry. After that, smoothly sand the surface and then with the help of a cloth or duster, get rid of any debris particles.
  5. Lastly, put on a second coat to your wood panel for extra safety. As soon as the wood panel dries fully, sand the surface one final time, before applying the finish of your choice. Some of the homeowners paint directly onto the sealant in order to make sure that the wood grain shows through. Others prefer prime using gesso, oil ground, watercolor ground or stick linen to the wood panel, etc as soon as the sealant has dried completely.

Useful Suggestion

It is highly recommended to use the GAC100 sealer, which is considered one of the best sealers in the business for wooden panels. GAC100 offers a strong, safety film on the wood panels surface. GAC100 also is a foundation for sticking to layers of gesso, if in case you are using gesso prime. Go through the 6 step process mentioned above to properly put on GAC100. Sealing a wood panel is the best option that will assist to safeguard your surface. By going through the above mentioned easy, you can successfully seal your wood panel easily.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved