How To Revitalize Corian Countertops: Step By Step Procedure Of Revitalizing Corian Countertop

Step By Step Procedure Of Revitalizing Corian Countertop

One of the most used varieties of the solid-surface countertops is the Corian countertops. They are available in all kinds of finishes which is ranging from the matte to high-gloss. However, with the span of time, the finishes can get very dirty, dull, as well as damaged. But with simply cleaning, with the help of certain products as well as methods will revitalize the countertops:

Cleaning Solvents

For the normal crumbs and the dirt, use soapy water or the preferred solid surface cleaner. The user can take an ammonia-based cleansing solution for cleaning purposes, but not the type that is used for cleaning the windowpanes this is because they can cause a waxy buildup. This will give the Corian surface a dull appearance. Besides that, it is also important to remember that because water will create blotchy marks or the film buildup on the Corian countertops, so be sure to dry out the surface completely, with the help of a clean, absorbent rag, after the counter is getting used.

Remove Stains

In case the Corian countertop has a blotchy mark that is due to the water, that time simply use a mild abrasive liquid cleaner for cleaning away the stains. On a moist sponge apply a moderate amount or simply damp the cloth, after that rub away the stain, rubbing in the small circular strokes. If needed then apply more pressure in case if the stain is not completely removed. For any kind of difficult stains, the user can use a deep cleaner. However, always wash out the surface using water afterward, and also completely dry with the rag.

Use Abrasive Pads

In the case of the scratches, they can be easily removed with the help of the green side of the abrasive pads. With a light sanding motion, sand in the direction of the scratch, and after that against the direction of the scratch. Apply some more pressure if required. Dust off all the residue as well as clean the abrasive pad in-between sanding.

Sand With Coarse Grit Sandpaper

Spray the water on the Corian countertop surface. Then, with the help of the hand sander which is loaded using the 800-grit sandpaper, start sanding throughout the countertop in the long strokes, focus on the scratches as well as also shifting the directions every time to prevent the prominent marks. Finally, wash the Corian countertop using the water and dry.

Follow With Fine Grit Sandpaper

Take a 1000-grit paper and then continue to spray the water while performing the sanding. Switch to the 1200-grit sandpaper, and sand with the same technique. Wash the countertop once again with clean water and finally dry thoroughly.

Refinish Countertop

Take the sponge, to create a matte finish simply by rubbing them all over the surface. For the gloss finish, simply use a white type of polishing paste together with the sander fitted that is with the finishing pads. Buff the countertop.

Disinfect

Finally, disinfect the Corian countertop with the help of one part of the bleach and one part of the water solution. After that rinse thoroughly, and dry completely.