How To Restore Parquet Flooring: Step By Step Instructions Of Restoring Parquet Flooring

Step By Step Instructions Of Restoring Parquet Flooring

Wood parquet floors are regarded as one of the long-lasting options that will help bring warmth as well as character to any space in your home. However, it is important to maintain your parquet floors properly, which in turn will make them last for generations. If in case you have a parquet floor at your home that is looking a bit tired, or you have just now moved into a house where there is a need for attention towards parquet, then you should be able to improve & enhance its condition. You just need to put a little effort and should have some specialty products that are particularly designed to clean as well as restore this beautiful type of flooring, known as parquet flooring. In order to restore your parquet flooring, go through the below-mentioned steps by step instructions carefully.

Step 1: Vacuum Clean To Remove Dust & Debris From Parquet Floor

First of all, you need to remove the furniture and get rid of all the dust and debris from the parquet floor with the help of a vacuum cleaner. Make sure that the vacuum cleaner should have a soft brush attachment especially for hard floors. Now, mix a wood-washing detergent with warm water & make its solution. Wash the floor with the help of this solution, making sure to squeeze the mop out as tightly as you possibly can so that it is damp, rather than wet. Too much water can be very harmful to the parquet flooring. With the help of a scrubber, get rid of the stubborn marks. Repeat the mopping process using clean, warm water in order to get rid of all traces of soap.

Step 2: Select A Flooring Section That Is Not Normally Seen

Now, choose a section of flooring that is not generally seen, such as underneath a sofa or a set of shelves, if you are not aware of whether the floor, in the first instance, had a wax or oil finish. Put two drops of water on the section of the floor. Leave the drops for nearly 10 minutes, before examining the results. If you find out white spots on the parquet, then the floor was finished with either oil or wax. If you do not find any spots, then one among the lacquer or varnish was used. Eliminate white spots from the parquet with the help of a piece of steel wool coated in floor wax.

Step 3: Purchase An Appropriate Maintenance Product For The Original Finish

Next, you need to buy a suitable maintenance product when it comes to the fresh & indigenous finish on your parquet floor, which in turn will help restore it. Put or spread the product to the floor, in accordance with the manufacturer's instructions carefully. The majority of the maintenance products for floors having an original varnish or lacquer finish take the form of polishes. However, when it comes to an original oil or wax finish, you can either use polish or hard wax. When it comes to an oil or wax floor in very poor condition, use hard wax and spread two coats.

Step 4: Buff The Floor According To The Manufacturer's Instructions

Finally, it is time to buff the floor, however, before doing this, you need to go through the manufacturer's instructions carefully in order to know the time duration you should leave the maintenance product on the floor. There are two options to use: an old-fashioned buffing block or a semi-professional buffer, which you can use with the help of a large white pad attached. When it comes to parquet restoration, an ordinary domestic buffer may not be good enough in order to achieve the quality of finish necessary.