How To Restore Old Wood Furniture: Steps To Refinish Antique & Patio Wood Table & Chairs

How To Restore Antique/Old Wood Patio Furniture?

Here are some of the steps by which the customers can easily Restore Old Wood Furniture:

1. Clean The Furniture: Firstly the customers need to Clean all the dust and debris particles from the furniture product. The customers then need to Place the old Wood furniture product in the direct sunlight in order to make the furniture product dry completely.
2. Make A Mixture: The Customers then need to make a mixture of bleach and the warm water in a large bucket. The customers should also add a little amount of laundry detergent in the mixture and then stir the mixture completely.
3. Soak The Cloth: The customers then have to soak the soft cloth in the cleaning solution and then rub the cloth all over the surface of the furniture product. They then have to clean the furniture product by using a soft clean rag. The customers then need to allow their Antique Wood Furniture product to dry completely in the direct sunlight.
4. Use The Linseed Oil: The customers then need to use linen cloth and moisten it with the Linseed oil and rub this cloth all over the furniture product. The customers then need to allow the oil to be on the furniture item for near about 15 minutes and then the customers need to clean away all the excess oil by using a clean cloth.

How To Refinish Antique/Old Wood Furniture?

Here are some of the steps by which the customers can easily finish their Old wood Furniture:

1. Clean Old Wood Furniture: Firstly the customers need to clean all the dust and other debris particles from the surface of the Old Wood Furniture by using a soft brush and then clean the table by using a damp cloth.
2. Remove Old Finish: Then the customers need to remove the old finish off the Old Wood Furniture by using a wire brush or by using a paint remover and then clean the Old Wood Furniture by using a soft dry cloth.
3. Stain Old Wood Furniture: The Customers then need to make the surface of the Old Wood Furniture smooth by using sandpaper and then apply a thin layer of wood filler and let it dry in the open air. Once the Wood Filler is completely dried then the customers need to apply a layer of the wood stain by using a paintbrush and allow it to dry in the open air for a few hours.
4. Applying The Final Finish: And at last the customers need to apply a thin layer of the wood varnish all over the surface of the Old Wood Furniture and allow it to dry and once the varnish is dried completely the customers need to clean the surface of the Old Wood Furniture by using a cloth and the mineral spirits and let it dry for a few minutes.

How To Refinish Old Wood Table?

Here are some of the steps by which the customers can easily Refinish the Old Wood Table:

1. Applying The Stripper: The Customers have to start by applying a layer of stripper all over the surface of wood table and let it be there for near about 20 minutes.
2. Removing The Finish: The customers then need to use a scraper made from the plastic material and remove all the stripper and then smooth the surface of the table by using sandpaper.
3. Applying The Stain: The customers then have to apply an even layer of wood stain by using a paintbrush and then use a soft cloth to remove all the excess wood stain.
4. Final Finish: Once the Table is completely dried the customers then have to apply a layer of tung oil all over the surface of the table and let the table dry completely before using it.

How To Refinish Old Wood Chairs?

Here are some of the steps by which the customers can easily Refinish Old Wood Chairs:

1. Clean The Chair: Firstly the customers need to make a mixture of degreasing cleanser and warm water in the large bucket. The customers then need to soak a soft sponge in this mixture and rub it all over the surface of the chair in order to remove all the dust and debris particles from the chair. The Customers then need to use a soft dry towel and remove all the excess moisture from the chair.
2. Use The Sandpaper: The customers then need to use sandpaper and gently rub it over the cracked areas of the chair and after that, they need to block all the scratches of the chair by using a wood filler and allow the wood filler to dry completely and then use a sandpaper in order to smooth the wood filler.
3. Apply The Stripper: The Customers then need to apply a thin layer of wax-build stripper to all the surface of the chair and allow it to dry for few hours accordingly.
4. Remove The Stripper: The customers then have to remove the wax built stripper and the old finish of the chair by using the scrapper made up of the plastic scraper. The customers then have to use the sandpaper and remove all the stains and the stripper from the chair surface. They then have to use a clean cloth and remove all the sand dust from the chair.
5. Use A Sealer: The Customers then need to apply a layer of stain by using a sponge and allow the stain to dry completely. Customers need to smooth the surface of the chair by using light sandpaper. The Customers at last need to seal up their finished chair by applying a layer of brush-on sealer.