Step By Step Process Of Restoring Cedar Siding
Cedar siding, which is usually known for its durability and ability to maintain a good finish for a longer time duration, does occasionally get damaged. And, it is also not completely protected or exempted to rot regardless of how well it has been treated as well as maintained. With the passage of time, cedar siding can get discolored and the surface cause to deteriorate due to weather, dirt, and numerous other wear and tear. However, it is generally possible to restore cedar siding once you notice some of the reasons mentioned above before it gets to the stage where you will need to replace it completely. With the help of suitable cleaning agents and other treatments, you will be able to make sure that the siding will last for many years to come.
Things You Will Need
- Cleaning Agent
- Bleach & Caulk
- Tint Sealant
- Wood Cleaner
- Pressure Washer
- Galvanized Primer
- Plastic Covers
- Wood Stain
Step 1: Make Necessary Preparations
First of all, you will need to close any windows as well as doors in the wall where you will start working on. You should use plastic covers or tarpaulins when it comes to protecting any exposed areas of landscaping features, including flower beds or outdoor lighting features.
Step 2: Use The Wood Cleaner
Use the wood cleaner in accordance with the instructions on the product’s packaging. This is a cleaning solution that is particularly designed to get rid of any stubborn stains or greasy marks on the wood. Put or spread this cleaning solution to the entire surface of cedar siding as long as the wood is entirely saturated with it. After that, give some time to this cleaning solution to soak in. Read the manufacturer’s instructions carefully on how long it should be left on.
Step 3: Rinse Off The Cleaner
As soon as the cleaner has been left to soak into the wood for the required amount of time, you should rinse the surface thoroughly with the help of a pressure washer in order to get an adequate cover. Keep the pressure washer at a low setting and having a 40-degree tip. Rinse the entire surface, starting from the top and moving down in a systematic manner. Cover the surface equally, using constant motion so that you will not have to focus too much on a certain area. When you move the pressure washer around, attempt to follow the grain of the wood. Leave the surface as long as it is completely dry before moving to the next step.
Step 4: Apply Primer & Caulk
Now, spread the galvanized primer to the dry surface. Give the cedar siding a thorough coat, which in turn will greatly help to safeguard it from the elements. Let the primer dry for at least three days or as recommended by the manufacturer. Some areas of the cedar siding, including around openings or fixtures, may need caulking again. Check the entire wall completely and ensure that any area which needs new caulk is taken care of appropriately.
Step 5: Treat The Wood
Finally, you need to treat the wood again, which as a result, will help further safeguard it from weather and UV light. Put or spread a tinted sealer to the surface, and lastly, stain the wall with the help of an appropriate wood stain of your choice. The wood should dry after a few of days, and the job will be complete.