Step By Step Process Of Replacing Recessed Lighting With LED
Recessed lighting is a kind of lighting that can enhance to your home’s ambiance as well as offer extra lighting for certain areas. However, these kinds of lights, usually known as can lights, high hat lights or pot lights, may add to your electric bill. In order to avoid excess electric bill, you can replace recessed lighting with more efficient LED lighting that can help contribute to energy savings, meaning lower electric bills. Go through the below-mentioned step by step process carefully in order to replace recessed lighting with LED:
Step 1: Recessed Lighting Conversion Kits
It is not easy & simple to change a recessed light bulb unlike putting an LED bulb into the old fixture. Replacing recessed lighting is an easy task with a recessed lighting conversion kit. These LED marvels are very easy to install and the energy savings can really add up, due to the reason that typical recessed lighting layouts in a home include multiple fixtures. In fact, the majority of the remodeling recessed lighting uses LED bulbs, due to the fact that it is easy to install, and has the energy efficiency. LED bulbs last much longer in comparison to other kinds of light bulbs. The best thing about LED bulbs is that you will not have to change them frequently as soon as you make the switch. An LED bulb can stay lit at least for 50,000 hours. There are 8,750 hours in one year. Even if you keep the lights on for 24 hours, an LED bulb could remain on for more than 5 years. If you use an LED bulb for 8 hours a day, it could last for nearly 17 years.
Step 2: Check Existing Recessed Lights
Examine the mounting springs when it comes to converting your existing recessed lights to LED. The torsion springs on an LED retrofit light adjusts into the brackets within the housing. If there are no internal brackets on your existing housing, then replace the fixture with a universal type.
- Before you start, it is important to turn off the breaker that controls the power for the recessed light fixtures where you are going to work on.
- Get a ladder in order to make sure that you reach the recessed lighting in your ceiling. Reach into the fixture before pulling out the light bulb from the light housing.
- Pull down the trim and find out how it is secured or fixed to the housing. If the trim is secured by v-shaped torsion springs, then the housing will work with LED retrofit lights.
- If you are not sure, pull out the trim entirely and look inside the housing in order to find out if the brackets are on the inside.
Step 3: Prepare The Existing Housing
- Loosen up the old bulb & remove it from the recessed lighting housing.
- Pull out the old trim from the outer ring of the housing.
- Squeeze the side spring clips in order to get rid of the light housing. You will notice the light socket at the top of the well.
- Fit the rear plate in the housing by loosening the wing nut that helps in the adjustment. Push the housing up, before retightening the nut. This will help create the breathing room for the LED light.
Step 4: Connect The LED Light
- Open the LED recessed lighting conversion kit and examine in order to make sure that you have everything you need before you are standing on the ladder.
- Take out the LED replacement recessed lights before connecting the bulb socket adapter included in the kit, if not pre-assembled.
- Secure & attach the light bulb end of the LED into the void light bulb socket in the recessed light housing.
Step 5: Insert The LED Unit
- Firmly press the spring arms on each side of the LED unit together. Move the arms smoothly into the brackets inside the housing.
- Push upward as long as the LED light unit clicks into place as well as the trim is flush with the ceiling.
- If the light doesn't fit flush, then you need to try & fit the rear panel on the housing upwards.
- When the LED unit has been installed correctly, then you can switch on the power at the breaker.
Step 6: Smart LED Recessed Lighting
If you are looking to take your home’s recessed lighting to the next level, then you can look for smart LED conversion kits. With these retrofit kits, it is easy to convert conventional can lights into smart lighting. As soon as a smart LED bulb is connected to your wireless network, you can control the light using a mobile app or voice commands via Google Assistant. You can easily dim or brighten the lights whenever you like. Smart LED bulbs also helps you to opt from a huge range of cool to warm glows. When it comes to changing a recessed light bulb to an LED bulb, use a recessed lighting conversion kit in order to update the fixture. LED bulbs are very energy efficient, therefore, replacing recessed lighting can play a huge role when it comes to savings on your electric bill. If you use smart LED retrofit kits, it will give your recessed lighting extra features, such as voice activation and options for dimming.