4 Easy Steps To Repair/Fix Laminate Particle Board
Here are some of the steps by which the customers can easily Repair/Fix Laminate Particle Board:
- Repair The Loose Screw: The customers need to start by repairing the un-tight screw by simply detaching the loose screw and then stuffing the hole in the particle board by using the carpenter's glue. The customers then need to insert the wooden edge of the matchstick directly to the hole and then re-insert the screw accordingly. They need to use many wooden edges of the matchstick in order to build enough lumps so that the screw will easily fit in that hole.
- Drill New Holes: The customers then need to use the electric drill and then create a new hole by the sides of the crumbled holes if in case the screws won't fit perfectly to the holes. The customers are advised not to over-drill the screws as it can become loose or the stripped as well.
- Use The Wood Glue: The customers then need to use the carpenter's glue and then apply it to the chipped spots in order to prepare the chip un-noticeable. If in case there are large chips on the particle board then the customers are advised to use the wood glue directly to the chipped areas and they need to grasp it in one place by using the wood clamp accordingly. The customers then need to wipe away all the excess glue from the particle board by using the soft cloth.
- Purchase The Edge Strip: The customers then need to wrap those edges that are having excess chips and that too with a corner strip. The customers can easily purchase the Edge strips from their nearby home improvement stores and the edge strips are available in many color finishes that can easily match with the laminated particle board.