How To Repair Chipped Veneer Furniture: Steps To Fix Chipped Veneer On Antique Furniture

Steps To Fix Chipped Veneer On Antique Furniture?

Veneer is actually a thin layer of wood which is attached with glue to a solid base, it is very vulnerable to damage on wooden furniture. The veneer gets damaged by the Prolonged humidity or exposure to water that can soften the glue, results in veneer blister, crack or peel, below are some of the steps to repair the veneer:

Chipped Or Missing Veneer

In order to fix the Chipped Or Missing Veneer first of all set a sheet of bond paper over the damaged veneer. Rub it with a dull lead pencil gently over the paper then the edges of the damaged area will get marked on the paper. After that use this marked paper as a template in order to cut the veneer, then cut the patch carefully and firmly with a sharp craft knife now glue the patch and surface of the furniture.

Blisters

Small of the blisters in veneer can be easily flattened with heat. In order to repair the blistered veneer, Press and hold the blistered area firmly with a medium-hot iron. If in any case there are several blisters, that time move the iron slowly and evenly back and forth. However, while repairing the blistered veneer be careful not to touch the exposed surface with the hot iron. After that weight the repaired area solidly for almost 24 hours. Then polish and wax the surface.

Loose Veneer

The Lifted veneer occurs most often at the corners of furniture like tabletops, cabinet and dresser edges, legs, and drawer fronts. In case the loose veneer is undamaged, it can be reglued with the best quality glue. First of all, remove the old glue on the furniture as well as the back of the veneer, the old glue can be removed with the help of the sharp craft knife or razor blade. Now clean both the bonding surfaces with benzene to remove any residue and sand both surfaces with the fine-grit sandpaper. Reglue the veneer whatever adhesive is used that should be clamped or weighted for one to two days.